Abstract:Surface roughness with topography modeling is one of the most important indicator for evaluating the surface quality in the machining process. This paper establishes a 3D surface roughness prediction model for bevel milling by considering the factors such as milling geometry, motion trajectory, and elastic-plastic deformation. Most of the existing roughness prediction models for bevel milling are based on regression models combined with multiple methods, which makes these models cannot well applied in complicated applications. Aiming at the change of contact area between tool and workpiece in bevel milling, the concept of effective cutting edge is introduced to establish a surface topography simulation model. Furthermore, this model fully considered the milling method, machine perpendicularity, and elastic-plastic deformation. Combined with the international standard of three-dimensional surface roughness, the roughness is predicted according to the residual height of each point on the surface topography. In order to verify the model accuracy and to explore the influence of process parameters on roughness and milling force in bevel and plane milling, two orthogonal experiments are designed in this paper. The experimental results show that the surface topography simulation results are consistent with the actual shape characteristics. The average relative error of roughness prediction is 7.93%, and the minimum is only 0.84%. In addition, the experimental results show that the two factors that have a great influence on the roughness are the spindle speed and feed rate, while the cutting depth and step distance greatly impact on the milling force.

Roughness control method for five-axis flank milling based on the analysis of surface topography

Elliptical Model for Surface Topography Prediction in Five-Axis Flank Milling

Geometry Simulation and Evaluation of the Surface Topography in Five-Axis Ball-End Milling

Development of Ultra-Precision Grinding Process for Aspheric Surface Based on Feed Rate Controlling and Error Compensation Methods

Study on Analytical Model of Surface Roughness Prediction in NC Machining

Research On Feedrate Control Strategy For Sculptured Surfaces Machining With Five-Axis Cnc

Feedrate Scheduling Method for Constant Peak Cutting Force in Five-Axis Flank Milling Process

A Cutting Force Model Based on Compensated Chip Thickness in Five-Axis Flank Milling

Modeling and simulation of surface topography in five-axis ball end milling

Influence of Tool Rotation Errors on Flank Machined Surface

A Compound Feedrate Control Method For Multi-Axis Cnc Machining

3D bevel surface topography analysis and roughness prediction by considering the cutter-workpiece dynamic interaction

Surface Contour Error Model of Five-Axis Machining Considering Multifactor Coupling Effects

An accurate surface error optimization for five-axis machining of freeform surfaces

Theoretical investigation on the flank milled roughness profile in quasi-homogeneous materials

Prediction of Cutting Forces in Flank Milling of Parts with Non-Developable Ruled Surfaces

Simulation Efficiency Optimization Method of Flank Milling for Nondevelopable Ruled Surface Based on Cutting Contact Conditions

Dimensional surface error prediction model in five-axis flank milling for thin-walled parts

A New Approach of Modelling Bottom Edge Cutting in 4-Axis Rough Milling of Complex Parts and Its Application on Feed Rate Optimization

Tool Orientation Sequence Smoothing Method Based on the Discrete Domain of Feasible Orientations

A novel tool-path generation method for five-axis flank machining of centrifugal impeller with arbitrary surface blades