Abstract:Currently, to satisfy the stringent requirements on the physical properties of sculptured surfaces, workpiece machining attempts to guarantee the level of machining accuracy while improving the efficiency as much as possible. Because of the characteristics of the sculptured surfaces, the machine tool is usually run at a lower feedrate to avoid large impact forces. However, this sacrifices machining time and still may not meet the requirements. This article presents a novel minimum-time feedrate schedule method to improve the machining efficiency for five-axis machining considering the surface characteristic constraints. First, the mapping relationship between the surface characteristic and the kinematical parameters is constructed by analyzing the following error on each axis. After that, the new constraint conditions on machine tool kinematics limitation and its continuity constraints are given to address changes in the curvature. Next, a new acceleration/deceleration feedrate schedule method is presented based on quintic feedrate smooth profile to minimize the impact force as much as possible. Thus, a novel minimum-time feedrate schedule based on the bidirectional feedrate schedule algorithm is proposed to improve machining efficiency while respecting various constraints. Finally, a sculptured surface with varied curvature is used to illustrate the significant reduction in processing time and improvement in surface quality in large curvature region after scheduling. The simulation and experimental results show that the proposed method can improve the machining efficiency while guaranteeing the machining accuracy.

A Compound Feedrate Control Method For Multi-Axis Cnc Machining

Research On Feedrate Control Strategy For Sculptured Surfaces Machining With Five-Axis Cnc

Optimal Feed Rate Control for Multi-Axis CNC Machining of Free Form Surfaces

A Real-Time Dual NURBS Interpolator with Optimised Control of Flexible Acceleration and Deceleration for Five-Axis CNC Machining

Study of Linear Feedrate Control in NC Machining

Generating Efficient Toolpath by Cutter Posture Optimization in Five-Axis Machining Based on Inverse Feedback Mechanism

Crossing Principle-Based Feedrate Planning Method for 5-Axis CNC Milling with Drive Constraints

Multi-constrained Adaptive Feedrate Control for 5-Axis Machining

Machining Speed Enhancement for Free-form Surface of Cross-sectional Design Based on Step Length Optimization

Method of Feed Rate Planning in Five-axis Machining

Control Method of Tool Axis Vector Based on Kinematics Characteristics for Five-Axis NC Machining

Control of Constant Surface Feed for LatheMill Machine with Seven-Five Axis

Feedrate scheduling strategy for free-form surface machining through an integrated geometric and mechanistic model

An Adaptive Feedrate Scheduling Method With Multi-Constraints For Five-Axis Machine Tools

A Novel Minimum-Time Feedrate Schedule Method for Five-Axis Sculpture Surface Machining with Kinematic and Geometric Constraints

Multi-axis motion control method of complex trajectory for high-speed machining

Study on Cutter Radius Compensation Methods for 5-Axis Cnc Machining

Optimization Method of Tool Axis Vector Based on Kinematical Characteristics of Rotary Feed Axis for Curved Surface Machining

A smooth curve evolution approach to the feedrate planning on five-axis toolpath with geometric and kinematic constraints

Method Study on Optimization of Tool Axis Vector for Complex Surface of 5-Axis CNC

A Feedrate Scheduling in Die-Cavity Roughing Based on Cutting Force Surface Model