Abstract:Nonlinear errors in five-axis machining process are caused due to the nonlinear motions of the rotational axes, which are inevitable. For the RT-type machine tool, the workpiece setup location on the working table has a direct effect on the nonlinear errors, thus there must be an optimal setup position which can reduce the nonlinear errors. Today’s five-axis machine tools are mostly equipped the with the RTCP (rotational tool center point) function, with which the NC program becomes independent from the workpiece setup. In this paper, we have focused on finding the optimal workpiece setup for the RT-type machine tool with RTCP function, more specifically, the Mikron UCP 600 five-axis machine tool in our lab. The kinematics of the machine tool is briefly analyzed. Based on that, the nonlinear error evaluation method with RTCP interpolation is derived. With this method, nonlinear errors can actually be considered as a function of the workpiece setup position. Then, the particle swarm optimization (PSO) is applied to find the optimal workpiece setup, in which a mutation operation is used since PSO traps into local optimum easily. The proposed optimal workpiece setup method is implemented and tested. Example results show that the optimal setup with least nonlinear errors can be found. Some interesting results also show that the nonlinear errors are not sensitive with the z component of the workpiece setup vector. The proposed optimization is nearly zero-cost and easy to both understand and implement, yet has a potential to reduce the nonlinear errors and thus to improve the accuracy of five-axis machining.

A Parameter Zone Subdivision Method for Rotary Axes Motion Optimization in Five-Axis Toolpath Generation Using Inverse Evaluation Mechanism

Generating Efficient Toolpath by Cutter Posture Optimization in Five-Axis Machining Based on Inverse Feedback Mechanism

A new toolpath generation method with feed sensitive zones inspection based on inverse evaluation mechanism.

Five-axis trajectory generation based on kinematic constraints and optimisation

A Real-Time Dual NURBS Interpolator with Optimised Control of Flexible Acceleration and Deceleration for Five-Axis CNC Machining

Iso-Parametric Tool Path Planning for Five-Axis Compound Surface Machining

Improving Machined Surface Textures in Avoiding Five-Axis Singularities Considering Tool Orientation Angle Changes

A feedback toolpath generation method for compound trimmed surface with machine’s dynamic characteristics confined

Research on Inverse Evaluation Mechanism in Toolpath Generation Based on Global Interpolation Simulation

An accurate surface error optimization for five-axis machining of freeform surfaces

Numerical Control Tool-Path Generation for Subdivision Surface Using Toroidal Cutter on 5-Axis Machine Tool

Axis path planning of five-axis surface machining by optimizing differential vector of the axis movement considering tool posture limits

A Compound Feedrate Control Method For Multi-Axis Cnc Machining

Five-axis Tool Path Generation in CNC Machining of T-spline Surfaces

Research On Feedrate Control Strategy For Sculptured Surfaces Machining With Five-Axis Cnc

A generic uniform scallop tool path generation method for five-axis machining of freeform surface.

Approximate tool posture collision-free area generation for five-axis CNC finishing process using admissible area interpolation

Iso-Planar Feed Vector-Fields-Based Streamline Tool Path Generation for Five-Axis Compound Surface Machining With Torus-End Cutters

Tool orientation optimization method based on ruled surface using genetic algorithm

On the workpiece setup optimization for five-axis machining with RTCP function

Parametric Surface Trajectory Optimization Method of Five-axis Machining