Abstract:This paper establishes a new model for predicting machined surface topography and anisotropic texture direction in peripheral milling. Unlike previous models, this model takes into account the largest number of influential factors, i.e., tool setting error (radial offset and axial tilt), static tool deflection, forced vibration, chatter vibration, and stochastic tool grinding error and wear (STGEW). STGEW, quantified by the normal distribution (mu, sigma(2)), is incorporated into the model for the first time. The model predictions for 3D surface topography, anisotropic texture direction, 2D surface profile or roughness agree remarkably well with experimental or published results, under both stable and unstable milling conditions. It is found that static deflection slightly attenuates the effect of tool setting error on roughness. Even machining with fresh tools or tools with very small cutting length (<15 mm) and wear (VB similar to 5 mu m), inherent STGEW creates random scratches with different geometries parallel to feed direction on the milled surface. STGEW expands the difference of roughness in axial direction. STGEW induces an additional surface texture in feed direction, which co-exist with axial texture contributed by feed marks when standard deviation sigma to feed rate f(t) ratio is small. As sigma increases, (1) feed marks are gradually obliterated by scratches, and surface texture is only oriented in feed direction; (2) the mean and variance of roughness in both directions increase, and axial roughness prevails transverse toughness at high u. The study discovers that, STGEW, even with small sigma (e.g., sigma=[0.01 mu m, 0.1 mu m]), is an important factor affecting surface topography, anisotropic surface texture direction and roughness that cannot be ignored, especially in the case of low-feed machining, e.g., f(t) = 0.05 mm, which is commonly adopted in finish-milling of difficult-to-cut materials. The proposed model can be used to reliably and accurately predict surface topography, surface roughness and surface texture direction in peripheral milling operation.

3D Surface Topography Prediction in the Five-Axis Milling of Plexiglas and Metal Using Cutters with Non-Uniform Helix and Pitch Angles Combining Runout

Elliptical Model for Surface Topography Prediction in Five-Axis Flank Milling

Geometry Simulation and Evaluation of the Surface Topography in Five-Axis Ball-End Milling

The prediction of 3D surface topography in a high-speed micro-milling process with aerostatic spindle

Mechanistic Modeling of Five-Axis Machining with a General End Mill Considering Cutter Runout

A Unified Prediction Model of 3D Surface Topography in Face Milling Considering Multi-Error Sources

An accurate surface error optimization for five-axis machining of freeform surfaces

A novel method to predict surface topography in robotic milling of directional plexiglas considering cutter dynamical displacement

Surface Contour Error Model of Five-Axis Machining Considering Multifactor Coupling Effects

Systematic Study of the Prediction Methods for Machined Surface Topography and Form Error During Milling Process with Flat-End Cutter

Prediction of Surface Location Error Considering the Varying Dynamics of Thin-Walled Parts During Five-Axis Flank Milling

Multi-scale prediction of the geometrical deviations of the surface finished by five-axis ball-end milling

Envelope Surface Modeling and Tool Path Optimization for Five-Axis Flank Milling Considering Cutter Runout

Modelling of Machined Surface Topography and Anisotropic Texture Direction Considering Stochastic Tool Grinding Error and Wear in Peripheral Milling

Tool Orientation Optimization Considering Cutter Deflection Error Caused by Cutting Force for Multi-Axis Sculptured Surface Milling

Modelling and Prediction of the Effect of Cutting Strategy on Surface Generation in Ultra-Precision Raster Milling

A Normal Section Plane Method for Profile Error Analysis of Five-Axis Machine Tools Based on the Ideal Tool Flank Milling Surface

Topography prediction at boundaries between sub-regions in the 5-axis milling of Plexiglas based on dimension reduction method

An Efficient Approach for Milling Dynamics Modeling and Analysis with Varying Time Delay and Cutter Runout Effect

Model for the prediction of 3D surface topography and surface roughness in micro-milling Inconel 718

3D bevel surface topography analysis and roughness prediction by considering the cutter-workpiece dynamic interaction