Abstract:Poly(ethylene oxide) based polymer electrolytes(PEO-SPEs) suffer from a narrow electrochemical window and deliver poor electrochemical performance when coupling with 4.2 V cathode. This severely limits the scope of its application. Here, a combination of physical stirring and electrochemistry is used to form an ultrathin and uniform cladding layer on the LiCoO2 particles. The results show that in addition to the decomposition of LiPO2F2 during the charge/discharge cycling, decomposition reactions occur during the stirring and drying process by Xray photoelectron spectroscopy (XPS), field emission scanning electron microscope (FESEM) and transmission electron microscope (TEM). This novel method effectively improves the electrochemical performance of 4.2 V PEO based solid-state lithium batteries. In particular, the cell shows excellent and stable electrochemical performance, exhibiting a discharge capacity of 112.0 mAh g(-1) after 200 cycles, a capacity retention rate of 79.4% and a capacity decay rate of approximately 0.1% per cycle when the surface of LiCoO2 is coated with 2 wt% LiPO2F2. In comparison, the discharge capacity of the unmodified LiCoO2 cathode is found to be only 75.6 mAh g(-1) after 100 cycles, with a poor capacity retention rate of 56.8%. Based on the basis of the above research, a new process was explored and also shows excellent interfacial stability by dispersing LiPO2F2 directly inside the binder which with a discharge capacity of 109.2 mAh g(-1) and a capacity retention rate of 84.5% after 145 cycles. This novel approach opens up a new pathway for solving the problem of interfacial stability between PEO based polymer electrolytes and high-voltage cathode.

Investigation on a 3.2V LiCoPO4/Li4Ti5O12 Full Battery

A Novel Three-Dimensional Cathode with Stable Long Cycling Performance for Lithium Oxygen Batteries

An Ultra-Thin Polymer Electrolyte for 4.5 V High Voltage LiCoO2 Quasi-Solid-state Battery

In Situ-Constructed Multifunctional Interface for High-Voltage 4.6 V LiCoO2

Designing Advanced In Situ Electrode/Electrolyte Interphases for Wide Temperature Operation of 4.5 V Li||LiCoO<sub>2</sub> Batteries

Energy-Density Improvement in Li-Ion Rechargeable Batteries Based on LiCoO2 + LiV3O8 and Graphite + Li-Metal Hybrid Electrodes

A Novel Bifunctional Self‐Stabilized Strategy Enabling 4.6 V LiCoO2 with Excellent Long‐Term Cyclability and High‐Rate Capability

Outside‐In Nanostructure Fabricated on LiCoO2 Surface for High‐Voltage Lithium‐Ion Batteries

LiCoPO4-based ternary composite thin-film electrode for lithium secondary battery

A high-rate long-life Li4Ti5O12/Li[Ni0.45Co0.1Mn1.45]O4 lithium-ion battery

Lattice Engineering on Li 2 CO 3 ‐Based Sacrificial Cathode Prelithiation Agent for Improving the Energy Density of Li‐Ion Battery Full‐Cell

Achieving a high-specific-energy lithium-carbon dioxide battery by implementing a bi-side-diffusion structure

Ionic liquid additive stabilized cathode/electrolyte interface in LiCoO2 based solid-state lithium metal batteries

In-situ reconstructed surface/inner-structure synergistic design enabling 4.6 V LiCoO 2 cathode for all-solid-state thin-film battery

Practical Prelithiation of 4.5 V LiCoO 2 ||Graphite Batteries by a Passivated Lithium‐Carbon Composite

Scalable Precursor-Assisted Synthesis of a High Voltage LiNiyCo1-yPO4 Cathode for Li-Ion Batteries

Three-Dimensional Carbon-Coated LiFePO4 Cathode with Improved Li-Ion Battery Performance

Comparative Performance of LiFePO4 and LiNi0.6Co0.2Mn0.2O2 Cathode Materials for Lithium Batteries with Solid–liquid Hybrid Electrolytes

In-situ Modification of Ultrathin and Uniform Layer on LiCoO2 Particles for 4.2 V Poly(ethylene Oxide) Based Solid-State Lithium Batteries with Excellent Cycle Performance

Mesocarbon Microbeads Boost the Electrochemical Performances of LiFePO 4 ||Li 4 Ti 5 O 12 through Anion Intercalation

Electrochemical and Structural Studies of Lico1/3mn1/3fe1/3po4 As A Cathode Material for Lithium Ion Batteries