Abstract:A long‐cycle‐life solid‐state Li–CO2 battery operating at elevated temperatures by constructing a stable and high ionic conductive molten salts interface (MSI) is reported. The MSI can effectively improve the interface contact and suppress interface reactions between the Li‐anode and LAGP‐electrolyte even at 150 °C, thus the assembled solid‐state Li–CO2 battery shows outstanding cycle stability over 980 cycles. High‐energy rechargeable lithium‐ion batteries, especially solid‐state lithium metal batteries, are increasingly required to operate at elevated temperatures in addition to pursuing operation at low temperatures. However, the notorious chemical and electrochemical reactions at the interface between the Li‐anode and solid state electrolyte (SSE) make these batteries lose almost all of their capacity and power at elevated temperatures. Here, a safe and long‐cycle‐life solid‐state Li–CO2 battery operating at elevated temperatures by constructing a stable and high ionic conductive molten salts interface (MSI) is reported. The MSI can effectively improve the interface contact and suppress interface reactions and the thermal runaway between Li‐anode and Li1.5Al0.5Ge1.5P3O12 (LAGP)‐electrolyte even at high temperatures, thus enabling an ultra‐low interface impedance (≈15 Ω) and discharge/charge overpotential (≈15 mV) for high temperature symmetric battery. In addition, the MSI‐coated LAGP‐electrolyte shows an ultra‐flat and continuous surface that enables a homogeneous Li tripping/plating during cycles. As a result, the Li symmetric battery shows superior cycling stability over 600 h at 0.1 mA cm−2 at 150 °C. The assembled solid‐state Li–CO2 battery using Ru catalysts shows outstanding cycle stability over 980 cycles at 150 °C, with a capacity limitation of 500 mAhg–1 at 500 mA g−1.

A high-rate long-life Li4Ti5O12/Li[Ni0.45Co0.1Mn1.45]O4 lithium-ion battery

A Novel Three-Dimensional Cathode with Stable Long Cycling Performance for Lithium Oxygen Batteries

High Performance Hybrid Mg-Li Ion Batteries with Conversion Cathodes for Low Cost Energy Storage

A high-power and fast charging Li-ion battery with outstanding cycle-life

Elements Gradient Doping in Mn-based Li-rich Layered Oxides for Long-Life Lithium-Ion Batteries

High‐Voltage Li‐Ion Full‐Cells with Ultralong Term Cycle Life at Elevated Temperature

Balancing interfacial reactions to achieve long cycle life in high-energy lithium metal batteries

Optimizing Main Materials for a Lithium-Air Battery of High Cycle Life

Pathways for practical high-energy long-cycling lithium metal batteries

A High‐Energy Long‐Cycling Solid‐State Lithium‐Metal Battery Operating at High Temperatures

An Effectively Activated Hierarchical Nano‐/Microspherical Li <sub>1.2</sub> Ni <sub>0.2</sub> Mn <sub>0.6</sub> O <sub>2</sub> Cathode for Long‐Life and High‐Rate Lithium‐Ion Batteries

A Sustainable Solid Electrolyte Interphase for High‐Energy‐Density Lithium Metal Batteries under Practical Conditions

Combining Fast Li-Ion Battery Cycling with Large Volumetric Energy Density: Grain Boundary Induced High Electronic and Ionic Conductivity in Li4Ti5O12 Spheres of Densely Packed Nanocrystallites

Controllable Long-term Lithium Replenishment for Enhancing Energy Density and Cycle Life of Lithium-ion Batteries

Fast Charging of Energy-Dense Lithium Metal Batteries in Localized Ether-Based Highly Concentrated Electrolytes

Designing Advanced In Situ Electrode/Electrolyte Interphases for Wide Temperature Operation of 4.5 V Li||LiCoO<sub>2</sub> Batteries

Long-life lithium-ion batteries realized by low-Ni, Co-free cathode chemistry

High-Efficiency Lithium Metal Batteries with Fire-Retardant Electrolytes

Enhanced Long-Term Cycling Life of Ni-Rich NMC Cathodes in High-Voltage Lithium-Metal Batteries

An Effectively Activated Hierarchical Nano‐/Microspherical Li1.2Ni0.2Mn0.6O2 Cathode for Long‐Life and High‐Rate Lithium‐Ion Batteries

Colloid Electrolyte with Changed Li+ Solvation Structure for High‐Power, Low‐Temperature Lithium‐Ion Batteries