Abstract:Co-free Li-rich Mn-based layered oxides (LRMLOs) are attractive cathode materials for lithium-ion batteries due to their low cost, high energy density and environmental friendliness. However, they also suffer from the drawbacks of low initial Coulombic efficiency, rapid voltage fading and capacity decay, and poor rate performance as the general LRMLO cathode, which prevent their practical applications. In the present work, a multilayer surface coating composed of Li 2 B 4 O 7 /B 2 O 3 and a spinel heterostructure rich-in oxygen vacancies are in-situ formed at the surface of the Co-free LRMLO particles by a facile thermal reduction treatment with NH 4 B 5 O 8 . The multilayer surface improves greatly the electron and ion conductivities, and plays significantly synergistic roles on suppressing oxygen release, reducing the dissolution of Mn and Ni elements, retarding the structure transformation from layered to spinel, and preventing the side reaction of the active material with electrolyte during cycling for the cathodes. As a result, the overall electrochemical properties of the cathodes are significantly improved. With an optimized addition of 10 wt% NH 4 B 5 O 8 , the initial Coulombic efficiency of the cathode is as high as 90.0%, and a capacity of 275 mAh g -1 is obtained at 0.1 C (1 C = 200 mA g -1 ) with the capacity retention of 98.5% after 100 cycles. A capacity of 194 mAh g -1 is maintained after 300 cycles at 1 C, with the capacity retention of 92.8%. A capacity of 117 mAh g -1 is obtained at a high rate of 20 C. In addition, the voltage fading during cycling is also greatly inhibited. The structure evolution of the cathode material during cycling is systematically investigated and the mechanism for the improved electrochemical properties is proposed. The present work provides a new surface structure design strategy and the method for enhancing the overall electrochemical performance of Co-free Li-rich Mn-based layered oxide cathodes.

Elements Gradient Doping in Mn-based Li-rich Layered Oxides for Long-Life Lithium-Ion Batteries

Progressive Concentration Gradient Nickel-Rich Oxide Cathode Material for High-Energy and Long-Life Lithium-Ion Batteries

Mitigation of Cation Mixing of LiNiO2-based Cathode Materials by Li-doping for High-Performing Lithium-Ion Battery

Long-Term Cycle Stability Enabled by the Incorporation of Ni into Li2MnO3 Phase in the Mn-Based Li-Rich Layered Materials

Full Concentration Gradient‐Tailored Li‐Rich Layered Oxides for High‐Energy Lithium‐Ion Batteries

Unlocking The Potential of Li‐rich Mn‐based Oxides for High‐rate Rechargeable Lithium‐ion Batteries

Enhanced long-term cyclability in Li-Rich layered oxides by electrochemically constructing a LixTM3-xO4-type spinel shell

Design of a new Li-rich Mn-based ternary cathode material based on Ni, Co, and Mn action mechanism

Delocalized Li@Mn6 Superstructure Units Enable Layer Stability of High-Performance Mn-rich Cathode Materials

High-performance ternary metal oxide anodes for lithium storage

Achieving Long‐Life Ni‐Rich Cathodes with Improved Mechanical‐Chemical Properties Via Concentration Gradient Structure

Achieving high structure and voltage stability in cobalt-free Li-rich layered oxide cathodes via selective dual-cation doping

Recent progress in Li and Mn rich layered oxide cathodes for Li-ion batteries

High Performance Li[Li0.2Ni0.13Co0.13Mn0.54](BO4)0.75x(BO3)0.25xO2-3.75x Cathode with Polyanion for Li-Ion Batteries

Multifunctional surface structure with enhanced electron and ion conductivities for superior electrochemical performance of Co-free Li-rich Mn-based layered oxide cathodes

Enhanced Electrochemical Performance of Ti-doped Li1.2Mn0.54Co0.13Ni0.13O2 for Lithium-Ion Batteries

A Li-rich Layered Oxide Cathode with Negligible Voltage Decay

High-Performance Lithium-Rich Layered Oxide Material: Effects of Preparation Methods on Microstructure and Electrochemical Properties

Optimizing Both Bulk and Surface Structure of Li‐Rich Layered Cathodes for Long‐Life and Safe Li‐Ion Batteries

Electrochemically Inert Li2MnO3: The Key to Improving the Cycling Stability of Li-Rich Manganese Oxide Used in Lithium-Ion Batteries

Enabling Long‐Term Cycling Stability Within Layered Li‐Rich Cathode Materials by O2/O3‐Type Biphasic Design Strategy