Abstract:Ni-rich LiNixMnyCo1-x-yO2 (x > 0.5) (NMC) materials have attracted a great deal of interest as promising cathode candidates for Li-ion batteries due to their low cost and high energy density. However, several issues, including sensitivity to moisture, difficulty in reproducibly preparing well-controlled morphology particles and, poor cyclability, have hindered their large scale deployment; especially for electric vehicle (EV) applications. In this work, we have developed a uniform, highly stable, high-energy density, Ni-rich LiNi0.6Mn0.2Co0.2O2 cathode material by systematically optimizing synthesis parameters, including pH, stirring rate, and calcination temperature. The particles exhibit a spherical morphology and uniform size distribution, with a well-defined structure and homogeneous transition-metal distribution, owing to the well-controlled synthesis parameters. The material exhibited superior electrochemical properties, when compared to a commercial sample, with an initial discharge capacity of 205 mAh/g at 0.1 C. It also exhibited a remarkable rate capability with discharge capacities of 157 mAh/g and 137 mAh/g at 10 and 20 C, respectively, as well as high tolerance to air and moisture. In order to demonstrate incorporation into a commercial scale EV, a large-scale 4.7 Ah LiNi0.6Mn0.2Co0.2O2 Al-full pouch cell with a high cathode loading of 21.6 mg/cm2, paired with a graphite anode, was fabricated. It exhibited exceptional cyclability with a capacity retention of 96% after 500 cycles at room temperature. This material, which was obtained by a fully optimized scalable synthesis, delivered combined performance metrics that are among the best for NMC materials reported to date.

Progressive Concentration Gradient Nickel-Rich Oxide Cathode Material for High-Energy and Long-Life Lithium-Ion Batteries

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

Outstanding Electrochemical Performance of Ni-Rich Concentration-Gradient Cathode Material LiNi0.9Co0.083Mn0.017O2 for Lithium-Ion Batteries

Prospect and Reality of Concentration Gradient Cathode of Lithium-ion Batteries

Ionic Conductive Interface Boosting High Performance LiNi0.8Co0.1Mn0.1O2 for Lithium Ion Batteries

Architecting Robust Full Concentration Gradient NCM712 Cathodes for High-Energy Li-Ion Batteries

Preparation of Long-term Cycling Stable Ni-Rich Concentration–Gradient NCMA Cathode Materials for Li-Ion Batteries

Synthesis of Full Concentration Gradient Cathode Studied by High Energy X-ray Diffraction

Experimental and mechanism research of gradient structured LiNi0.8Co0.1Mn0.1O2 cathode material for Li-ion batteries

Achieving Long‐Life Ni‐Rich Cathodes with Improved Mechanical‐Chemical Properties Via Concentration Gradient Structure

Cobalt-free concentration-gradient Li[Ni0.9Mn0.1]O2 cathode material for lithium-ion batteries

Systematic Optimization of Battery Materials: Key Parameter Optimization for the Scalable Synthesis of Uniform, High-Energy, and High Stability LiNi 0.6 Mn 0.2 Co 0.2 O 2 Cathode Material for Lithium-Ion Batteries

High-Ni NMC Cathode Material with Concentration Gradients in Lithium-Ion Batteries

Long-life lithium-ion batteries realized by low-Ni, Co-free cathode chemistry

Elements Gradient Doping in Mn-based Li-rich Layered Oxides for Long-Life Lithium-Ion Batteries

Surface Gradient Ni‐rich Cathode for Li‐ion Batteries

In Situsynthesis Of A Nickel Concentration Gradient Structure Of Ni-Rich Lini(0.8)Co(0.15)Al(0.05)O(2)With Promising Superior Electrochemical Properties At High Cut-Off Voltage

Concentration‐gradient structural LiFe0.5Mn0.5PO4/C prepared via co‐precipitation reaction for advanced lithium‐ion batteries

A gradient oxy-thiophosphate-coated Ni-rich layered oxide cathode for stable all-solid-state Li-ion batteries

Elevated stability of nickel-rich oxide cathode material with concentration gradient of transition metals via a novel size-controllable calcination method