Abstract:In this work, ultra‐thin electron‐ion dual conductor coating on the surface and Al gradient doping in the bulk phase of NCM523 is successfully achieved by ALD, which simultaneously enhances the conductivity and stability of NCM523 at high‐voltage. This modification has enabled NCM523 to achieve high‐capacity performance and long cycle life under ultra‐high current density (1900 mAh g−1, 10 C) at 4.6 V. Simultaneously achieving high‐energy‐density and high‐power‐density is a crucial yet challenging objective in the pursuit of commercialized power batteries. In this study, atomic layer deposition (ALD) is employed combined with a coordinated thermal treatment strategy to construct a densely packed, electron‐ion dual conductor (EIC) protective coating on the surface of commercial LiNi0.5Co0.2Mn0.3O2 (NCM523) cathode material, further enhanced by gradient Al doping (Al@EIC‐NCM523). The ultra‐thin EIC effectively suppresses side reactions, thereby enhancing the stability of the cathode‐electrolyte interphase (CEI) at high‐voltages. The EIC's dual conduction capability provides a potent driving force for Li+ transport at the interface, promoting the formation of rapid ion deintercalation pathways within the Al@EIC‐NCM523 bulk phase. Moreover, the strategic gradient doping of Al serves to anchor the atomic spacing of Ni and O within the structure of Al@EIC‐NCM523, curbing irreversible phase transitions at high‐voltages and preserving the integrity of its layered structure. Remarkably, Al@EIC‐NCM523 displays an unprecedented rate capability (114.7 mAh g−1 at 20 C), and a sustained cycling performance (capacity retention of 74.72% after 800 cycles at 10 C) at 4.6 V. These findings demonstrate that the proposed EIC and doping strategy holds a significant promise for developing high‐energy‐density and high‐power‐density lithium‐ion batteries (LIBs).

Architecting Robust Full Concentration Gradient NCM712 Cathodes for High-Energy Li-Ion Batteries

Progressive Concentration Gradient Nickel-Rich Oxide Cathode Material for High-Energy and Long-Life Lithium-Ion Batteries

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Synthesis of Full Concentration Gradient Cathode Studied by High Energy X-ray Diffraction

Mitigation of Cation Mixing of LiNiO2-based Cathode Materials by Li-doping for High-Performing Lithium-Ion Battery

Prospect and Reality of Concentration Gradient Cathode of Lithium-ion Batteries

Outstanding Electrochemical Performance of Ni-Rich Concentration-Gradient Cathode Material LiNi0.9Co0.083Mn0.017O2 for Lithium-Ion Batteries

High-Ni NMC Cathode Material with Concentration Gradients in Lithium-Ion Batteries

Preparation of Long-term Cycling Stable Ni-Rich Concentration–Gradient NCMA Cathode Materials for Li-Ion Batteries

Surface Gradient Ni‐rich Cathode for Li‐ion Batteries

Achieving Long‐Life Ni‐Rich Cathodes with Improved Mechanical‐Chemical Properties Via Concentration Gradient Structure

Regulation of Interface Ion Transport by Electron Ionic Conductor Construction toward High‐Voltage and High‐Rate LiNi0.5Co0.2Mn0.3O2 Cathodes in Lithium Ion Battery

Stabilizing high-Ni cathodes with gradient surface Ti-enrichment

Tailoring electrolyte enables high-voltage Ni-rich NCM cathode against aggressive cathode chemistries for Li-ion batteries

Ta/Ti Codoped Concentration Gradient High-Ni Cathodes for Long-Life Li-Ion Batteries

Integrated Surface Modulation of Ultrahigh Ni Cathode Materials for Improved Battery Performance

Highly‐Dispersed Single‐Crystalline Ni‐Rich Cathodes with Low Li/O Loss for High‐Power and Long‐Life Li‐Ion Batteries

Both Interface and Bulk Stable LiNi 0.5 Mn 1.5 O 4 Cathodes for High-Energy Li-Ion Batteries

Tailoring electrolyte to enable high-rate and super-stable Ni-rich NCM cathode materials for Li-ion batteries

Lithiophilic V2CTx/MoO3 Hosts with Electronic/Ionic Dual Conductive Gradients for Ultrahigh‐Rate Lithium Metal Anodes

Al2O3-Coated, Single Crystal Zr/Y co-Doped High-Ni NCM Cathode Materials for High-Performance Lithium-Ion Batteries