Abstract:The poly (ethylene oxide) (PEO)‐based electrolyte with excellent anode and cathode interfacial stability is constructed via the molecular coordination modulation induced by difluorobis(oxalato)phosphate (DFBOP). The introduction of DFBOP can facilitate the in situ generation of robust inorganic‐rich interphase involving LiF, LixPOyFz, and P─O on electrode surfaces, enabling the stable operation of lithium (Li) symmetric cells over 7000 h and 4.5 V Li/LiNi0.8Co0.1Mn0.1O2 cells over 100 cycles. Solid‐state lithium metal batteries (SSLMBs) with poly (ethylene oxide) (PEO)‐based electrolytes have increasingly become one of the most promising battery technologies due to high energy density and safety. However, adverse electrode/electrolyte interface compatibility issues hinder further application. Herein, a PEO‐based composite solid electrolyte with excellent anode and cathode interfacial compatibility is designed via the coordination modulation strategy induced by lithium difluorobis(oxalato)phosphate (DFBOP). By utilizing this electrolyte, the robust inorganic‐rich interphase involving LiF, LixPOyFz, and P─O components is in situ generated on lithium (Li) anode and LiNi0.8Co0.1Mn0.1O2 (NCM811) cathode surfaces via forceful coordination among PEO, lithium bis(trifluoromethanesulphonyl)imide, and DFBOP and subsequent adjustment of front orbital energy levels. It contributes to homogeneous lithium deposition and an effective impediment of PEO oxidation decomposition at high voltage, promoting superior interfacial stability. Consequently, Li‐symmetric cells with modified electrolyte can achieve a stable cycle over 7000 h at 0.2 mA cm−2. Specially, the cathode electrolyte interphase with a unique organic–inorganic interpenetration network structure enables the 4.5 V Li/NCM811 cells to cycle steadily over 100 cycles, with a high discharge capacity of 215.4 mAh g−1 and initial coulombic efficiency of 91.23%. This research has shed light on the interfacial design of PEO‐based electrolytes from the perspective of electrolyte coordination regulation to construct high‐performance SSLMBs.

An Ultra-Thin Polymer Electrolyte for 4.5 V High Voltage LiCoO2 Quasi-Solid-state Battery

Enabling Stable Cycling of 4.2 V High‐Voltage All‐Solid‐State Batteries with PEO‐Based Solid Electrolyte

4.2 V polymer all-solid-state lithium batteries enabled by high-concentration PEO solid electrolytes

Ultrathin, Mechanically Robust Quasi-Solid Composite Electrolyte for Solid-State Lithium Metal Batteries

High-performance PEO-based solid-state LiCoO2 lithium metal battery enabled by poly(acrylic acid) artificial cathode electrolyte interface

4.2 V poly(ethylene oxide)-based all-solid-state lithium batteries with superior cycle and safety performance

Tailoring Stable PEO‐Based Electrolyte/Electrodes Interfaces via Molecular Coordination Regulating Enables 4.5 V Solid‐State Lithium Metal Batteries

In Situ Fabricated Quasi‐Solid Polymer Electrolyte for High‐Energy‐Density Lithium Metal Battery Capable of Subzero Operation

Ultra-Thin and High-Voltage-Stable Bi-phasic Solid Polymer Electrolytes for High-Energy-Density Li Metal Batteries

Constructing robust cathode/Li interfaces and intensifying ion transport kinetics for PEO-based solid-state lithium-sulfur batteries

In-situ Modification of Ultrathin and Uniform Layer on LiCoO2 Particles for 4.2 V Poly(ethylene Oxide) Based Solid-State Lithium Batteries with Excellent Cycle Performance

Construction of Stable Li2O‐Rich Solid Electrolyte Interphase for Practical PEO‐Based Li‐Metal Batteries

Improving interfacial stability by in situ protective layer formation in 4.2V poly(ethylene oxide) based solid state lithium batteries

A Dual-Salt Peo-Based Polymer Electrolyte with Cross-Linked Polymer Network for High-Voltage Lithium Metal Batteries

Exceptional interfacial conduction and LiF interphase for ultralong life PEO-based all-solid-state batteries

Ultra-Long-Life and Ultrathin Quasi-solid Electrolytes Fabricated by Solvent-free Technology for Safe Lithium Metal Batteries

Differentiated Lithium Salt Design for Multilayered PEO Electrolyte Enables a High‐Voltage Solid‐State Lithium Metal Battery

10 μm‐Thick High‐Strength Solid Polymer Electrolytes with Excellent Interface Compatibility for Flexible All‐Solid‐State Lithium‐Metal Batteries

Solid Polymer Electrolyte Reinforced with a Li1.3Al0.3Ti1.7(PO4)3-Coated Separator for All-Solid-State Lithium Batteries

A High-Performance Self-Reinforced PEO-Based Blend Solid Electrolyte Membrane for Solid-State Lithium Ion Batteries

Porous Organic Cage-Based Quasi-Solid-State Electrolyte with Cavity-Induced Anion-Trapping Effect for Long-Life Lithium Metal Batteries