Abstract:Lithium-sulfur (Li-S) batteries have become candidate for the next-generation energy storage systems because of their high energy density and specific capacity. However, due to the shuttle effect of polysulfides and the safety problems caused by liquid organic electrolytes, practical commercial applications of Li-S battery have been severely limited. With the recent development of solid electrolyte, the strategy of replacing liquid electrolyte with the solid electrolyte has aroused extensive attention, which can both improve the safety of the battery and increase its energy density. However, in the absence of liquid components, poor interfacial contact and low ionic conductivity for solid electrolyte can seriously impair the electrochemical performance of solid-state Li-S batteries. By adding a certain amount of liquid plasticizer, the ionic conductivity is effectively ameliorated and the interface contact between the electrodes and the electrolyte is largely improved. Herein, a thermally polymerized composite gel polymer electrolyte (CPE) for quasi-solid-state Li-S battery is designed and fabricated. The CPE has a satisfactory ionic conductivity and wide electrochemical window of above 4.5 V. Especially, the addition of the garnet Li6.5La3Zr1.5Ta0.5O12 (LLZTO) powder improves the flame retardancy and thermal stability. In addition, the application of CPE in the Li-S battery can block the shuttle of polysulfide to some extent, and the quasi-solid-state Li-S battery assembled by CPE shows the good electrochemical performance and only a 0.22% decay per cycle in 200 cycles with 0.1C. Hence, this work provides a new strategy for design and development of the quasi-solid-state electrolyte for the application of Li-S battery. Moreover, due to its wide electrochemical window, CPE can also be applied in high-voltage cathode systems of lithium ion battery in the future.

Porous Organic Cage-Based Quasi-Solid-State Electrolyte with Cavity-Induced Anion-Trapping Effect for Long-Life Lithium Metal Batteries

An Ultra-Thin Polymer Electrolyte for 4.5 V High Voltage LiCoO2 Quasi-Solid-state Battery

An in-situ generated composite solid-state electrolyte towards high-voltage lithium metal batteries

Constructing robust cathode/Li interfaces and intensifying ion transport kinetics for PEO-based solid-state lithium-sulfur batteries

Covalent Organic Framework Enhanced Solid Polymer Electrolyte for Lithium Metal Batteries

Organic Cationic-Coordinated Perfluoropolymer Electrolytes with Strong Li+-Solvent Interaction for Solid State Li-Metal Batteries

Ultrathin, Mechanically Robust Quasi-Solid Composite Electrolyte for Solid-State Lithium Metal Batteries

5.1 Μm Ion-Regulated Rigid Quasi-Solid Electrolyte Constructed by Bridging Fast Li-Ion Transfer Channels for Lithium Metal Batteries

"Tree Trunk" Design for Flexible Quasi Solid‐State Electrolyte with Hierarchical Ion‐Channels Enabling Ultralong‐Life Lithium Metal Batteries

Hybrid poly-ether/carbonate ester electrolyte engineering enables high oxidative stability for quasi-solid-state lithium metal batteries

Cellulose-Assisted Vertically Heterostructured PEO-Based Solid Electrolytes Mitigating Li-Succinonitrile Corrosion for Lithium Metal Batteries

Engineering a Dynamic Solvent-Phobic Liquid Electrolyte Interphase for Long-Life Lithium Metal Batteries

A Multifunctional Silicon‐Doped Polyether Network for Double Stable Interfaces in Quasi‐Solid‐State Lithium Metal Batteries

Polyethylene oxide-Based solid electrolytes with fast Li-ion transport channels constructed from 2D montmorillonite for solid-state lithium-metal batteries

Double-layer Solid-State Electrolyte Enables Compatible Interfaces for High-Performance Lithium Metal Batteries

Preparation and performances of the modified gel composite electrolyte for application of quasi-solid-state lithium sulfur battery

Highly Stable Organic Molecular Porous Solid Electrolyte with One‐Dimensional Ion Migration Channel for Solid‐State Lithium−Oxygen Battery

Enabling highly stable lithium metal batteries by using dual-function additive catalyzed in-built quasi-solid-state polymer electrolytes

Poly(ethylene oxide)-based composite solid electrolyte for long cycle life solid-state lithium metal batteries: Improvement of interface stability through a dual mechanism

Anion‐Decoordination Cell Formation Process Stabilizes Dual Electrodes for Long‐Life Quasi‐Solid‐State Lithium Metal Battery

In Situ Formed Continuous and Dense Inorganic Borate‐Based SEI for High‐Performance Li‐Metal Batteries