Abstract:Silver (Ag) doping in carbon matrix have shown promising results in anti-bacterial potency. Adhesion of diamond-like-coating (DLC) on steel substrates is inferior; however, this can be circumvented by employing interlayers to it. In the present study, Ag incorporated DLC coating with chromium interlayer (Ag-DLC/Cr) was deposited on surgical SS using cathodic arc deposition technique. The topographical, morphological and structural analysis of the coating was performed using AFM, XRD, Raman spectroscopy and FTIR studies. The nanomechanical and wear performance of the coating was evaluated using nanoindentation, nanoscratch, dry sliding simulated tribotest and Vickers microhardness tests. Depositing chromium interlayer to DLC film resulted in improved hardness, adhesion and elastic modulus of the substrate due to sp3 content and formation of transmittal chromium carbide in the coating. Moreover, Ag doping causes formation of ductile bridges in carbon matrix enabling it to absorb more energy during deformation. While the coating exhibited higher strain hardening exponent and lower plastic work contributing to higher scratch hardness, lower deformation and no pile-up; the coating simultaneously resulted in reduction of wear rate by four orders of magnitude. SEM micrographs suggest emanation of lubricious film during tribotests due to dispersion of soft Ag clusters on the top layer, resulting in lower friction coefficient. Also, the sticky nature of DLC particles on the counter-face acted as an anti-adhesive agent thereby preventing transfer of material from the counterbody during tribotest. Lastly, the friction dynamics during dry sliding and Vickers microhardness test post tribotests highlights enhanced durability of Ag-DLC/Cr coated substrates.

Influence of Silver Incorporation on Toughness Improvement of Diamond-Like Carbon Film Prepared by Ion Beam Assisted Deposition

Effects of nanocrystalline silver incorporation on sliding tribological properties of Ag-containing diamond-like carbon films in multi-ion beam assisted deposition

Influence of Copper Content and Nanograin Size on Toughness of Copper Containing Diamond-Like Carbon Films

Improving Ag-DLC Film Adherence on High-Speed Steel by Varying Ag Contents in A Mid-Frequency Dual-Magnetron Sputtering

Influence of Ag Content and Nanograin Size on Microstructure, Mechanical and Sliding Tribological Behaviors of Ag-DLC Films.

Influence of Ag Contents on Structure and Tribological Properties of TiSiN-Ag Nanocomposite Coatings on Ti–6Al–4V

Microstructure and mechanical properties of Ag-containing diamond-like carbon films in mid-frequency dual-magnetron sputtering

Effects of Silver Segregation on Sputter Deposited Antibacterial Silver-Containing Diamond-Like Carbon Films

Comprehensive structural, nanomechanical and tribological evaluation of silver doped DLC thin film coating with chromium interlayer (Ag-DLC/Cr) for biomedical application

Diamond-like Carbon Film Synthesized by Ion Beam Assisted Deposition and Its Tribological Properties

Effect of Ion Bombardment Energy on the Properties of Diamond-like Carbon Film

Studies of Diamond-Like Carbon Films Prepared by Ion Beam-Assisted Deposition

Mechanical and tribological properties of non-hydrogenated DLC films synthesized by IBAD

Structural Characterization And Properties Enhancement Of Diamond-Like Carbon-Films Synthesized Under Low-Energy Ne+ Bombardment

Toughness Characterization and Toughening Mechanism of Diamond-like Carbon Films

Ion Beam Assisted Deposition of Diamond-Like Carbon Onto Steel Materials: Preparation and Advantages

Influence of Cr Contents and Nanograin Sizes on Microstructure, Mechanical and Sliding Tribological Behaviors of Hard Cr-Diamond-Like Carbon Films

Structure Characterization and Antibacterial Properties of Ag-DLC Films Fabricated by Dual-Targets HiPIMS

Preparation, Characterization and Tribological Properties of Diamond-Like Carbon Film on AZ31 Magnesium Alloy

Structural Characters and Tribological Properties of Diamondlike Carbon Films

Bonding Structure and Tribological Properties of Dlc Films Synthesized by Dual-Ion Beam Sputtering