Abstract:In the present work, the tribological mechanism of diamond-like carbon (DLC) films was investigated. DLC films were coated on metallic substrates (M50 steel, Ti-6Al-4V alloy and AISI 440C steel) by methane ion-beam deposition. Pin-on-disc experiments showed that the DLC films possess excellent wear resistance and exhibit low values of friction coefficient (ƒ < 0.1). The frictional response was characterized by an initial break-in period that was followed by an intermediate constant ƒ stage. The presence of a carbon transfer layer was observed on the wear scars of ball surfaces. Transmission electron microscopy and electron diffraction from the transfer layer showed that it contained a fine distribution of graphite nanoparticles (less than 5 nm) in a distorted diamond-like structure. Laser Raman spectra taken from the wear track region also revealed evidence of graphitization. In light of the present observations, the intermediate friction stage was mainly attributed to transfer layer formation. During long-duration wear experiments, a further reduction in ƒ was observed that finally reached steady state low friction (ƒ = 0.05–0.07) and an ultralow wear rate (about 1.6 × 10−9mm3 m−1 N−1). Steady state was related to the complete transformation of diamond-like to graphite-like carbon under thermal and strain effects from the repeated friction through a precursor stage involving hydrogen evolution and sp3 structure destabilization. The ultra-low wear rates were correlated to easy shear of low-strength atomic carbon interlayers in the graphitic structure.

Bonding Structure and Tribological Properties of Dlc Films Synthesized by Dual-Ion Beam Sputtering

Structural Characters and Tribological Properties of Diamondlike Carbon Films

Diamond-like Carbon Film Synthesized by Ion Beam Assisted Deposition and Its Tribological Properties

Diamond-like Carbon Film on 20 CrNiMo Steel Prepared by Hollow-Cathode Glow Discharge

Structure and Tribology of Hard Carbon-Films Synthesized by Ion-Beam Deposition

Investigation of Mechanical and Tribological Properties of Super-Thick DLC Films with Different Modulation Ratios Prepared by PECVD

Diamond-Like Carbon Thin Films Deposited On Ti6al4v Alloy Surface By Plasma Gun At Atmospheric Pressure

Friction and Wear Behaviors of Different DLC Films Sliding Against SiC and Si3N4 Balls under High Relative Humidity

Mechanical and tribological properties of non-hydrogenated DLC films synthesized by IBAD

Studies of Diamond-Like Carbon Films Prepared by Ion Beam-Assisted Deposition

Structure and Tribological Properties of Al-DLC Films Prepared by Medium Frequency Magnetron Sputtering

Structures and tribological properties of diamond-like carbon films prepared by plasma-based ion implantation on Si

Tribological Performance of Ultrathin Diamond-Like Carbon Films Prepared by Plasma-Based Ion Implantation

Tribological Properties of DLC Nanolayer on Si Prepared by Plasma-Based Ion Implantation

Structural Characterization And Properties Enhancement Of Diamond-Like Carbon-Films Synthesized Under Low-Energy Ne+ Bombardment

Structure and Tribological Properties of TiN_x/DLC Filmsprepared by Plasma Based Ion Implantation

Interface architecture for superthick carbon-based films toward low internal stress and ultrahigh load-bearing capacity

A study of the wear mechanism of diamond-like carbon films

Growth and Tribological Property Characterization of Diamond-Like-Carbon Films

Tribological Properties of Diamond-Like Carbon Films Deposited by Pulsed Laser Arc Deposition

Improvement of Tribological Behaviour of Biomedical Nanocrystalline Titanium by Magnetron Sputtered DLC/SiC Double Layer Films