Abstract:Silver (Ag) doping in carbon matrix have shown promising results in anti-bacterial potency. Adhesion of diamond-like-coating (DLC) on steel substrates is inferior; however, this can be circumvented by employing interlayers to it. In the present study, Ag incorporated DLC coating with chromium interlayer (Ag-DLC/Cr) was deposited on surgical SS using cathodic arc deposition technique. The topographical, morphological and structural analysis of the coating was performed using AFM, XRD, Raman spectroscopy and FTIR studies. The nanomechanical and wear performance of the coating was evaluated using nanoindentation, nanoscratch, dry sliding simulated tribotest and Vickers microhardness tests. Depositing chromium interlayer to DLC film resulted in improved hardness, adhesion and elastic modulus of the substrate due to sp3 content and formation of transmittal chromium carbide in the coating. Moreover, Ag doping causes formation of ductile bridges in carbon matrix enabling it to absorb more energy during deformation. While the coating exhibited higher strain hardening exponent and lower plastic work contributing to higher scratch hardness, lower deformation and no pile-up; the coating simultaneously resulted in reduction of wear rate by four orders of magnitude. SEM micrographs suggest emanation of lubricious film during tribotests due to dispersion of soft Ag clusters on the top layer, resulting in lower friction coefficient. Also, the sticky nature of DLC particles on the counter-face acted as an anti-adhesive agent thereby preventing transfer of material from the counterbody during tribotest. Lastly, the friction dynamics during dry sliding and Vickers microhardness test post tribotests highlights enhanced durability of Ag-DLC/Cr coated substrates.

Micro-structural, electrical, and tribological properties of SiC/DLC composite coating grown by PLD on steel

Diamond-like Carbon Film on 20 CrNiMo Steel Prepared by Hollow-Cathode Glow Discharge

Wear-resistance of Diamond-like Carbon Thin Films Deposited on the Metal Seal Ring Surface by Plasma Gun at an Atmospheric Pressure

Synergistic effect of surface textures and DLC coatings for enhancing friction and wear performances of Si3N4/TiC ceramic

Diamond-Like Carbon Thin Films Deposited On Ti6al4v Alloy Surface By Plasma Gun At Atmospheric Pressure

Excellent Adhered Thick Diamond-Like Carbon Coatings by Optimizing Hetero-Interfaces with Sequential Highly Energetic Cr and C Ion Treatment

Tribological performance of DLC-coated ceramics against cemented carbide under dry sliding conditions

Si-DLC films deposited by a novel method equipped with a co-potential auxiliary cathode for anti-corrosion and anti-wear application

Structural Characters and Tribological Properties of Diamondlike Carbon Films

Comprehensive structural, nanomechanical and tribological evaluation of silver doped DLC thin film coating with chromium interlayer (Ag-DLC/Cr) for biomedical application

Enhancement of tribological properties by dynamic mixing of diamond-like carbon/Mo films on steel

Analysis of Mechanical and Tribological Properties of Silicon Incorporated Diamond like Carbon Nanocomposite Coating

Mechanical and tribological properties of Si and W doped diamond like carbon (DLC) under dry reciprocating sliding conditions

Bonding Structure and Tribological Properties of Dlc Films Synthesized by Dual-Ion Beam Sputtering

Genesis of Superlow Friction in Strengthening Si-DLC/PLC Nanostructured Multilayer Films for Robust Superlubricity at Ultrahigh Contact Stress.

Tribological Behaviors of Diamond-Like Carbon Coatings on Plasma Nitrided Steel Using Three BN-containing Lubricants

Interface architecture for superthick carbon-based films toward low internal stress and ultrahigh load-bearing capacity

Study on the substrate surface micro-texturing/carburizing regulating the film-substrate adhesion and wear behavior of DLC coatings

Diamond-like Carbon Film Synthesized by Ion Beam Assisted Deposition and Its Tribological Properties

Binary elements (Si, Mo) co-doping strategy enhanced the tribological performance of diamond-like carbon films

Improved Interfacial Adhesion Between TiAlN/DLC Multi-Layered Coatings by Controlling the Morphology Via Bias