Abstract:To further enhance the hardness, wear, and corrosion resistance of high-entropy alloy (HEA) coatings, an AlCoCrFeNi-WC-WS2 composite coating was prepared on the surface of cast iron using laser cladding technology. X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS) analyses as well as microhardness, friction and wear, and electrochemical tests were performed to characterize and analyze the phase structure, composition, and forming quality of coating. The effects of process parameters such as laser power and scan rate on the microstructure and properties of coating were evaluated. With the increase in laser power, the amount of unmelted powder, cracks, and pores gradually decreases inside the coating, and the thickness and density increase. The coating is mainly composed of face-centered cubic (FCC) phase, carbide-reinforcing phase, and WS2 self-lubricating phase. WC and its in situ synthesized chromium and iron carbide increased the hardness of coating by 3-4 times of the substrate, and the maximum hardness can reach 1187.2 HV. WS2 exists as the self-lubricating phase in the coating, ensuring the formation and stability of lubricating film during friction and wear, helping the coating have favorable wear resistance. In addition, a compact passive film is formed by the corrosion-resistant elements Co, Cr, and Ni, enabling the coating to have great corrosion resistance in 3.5 wt% NaCl solution.

Structure and Tribology of Hard Carbon-Films Synthesized by Ion-Beam Deposition

Effect of Process Parameters on Microstructure and Properties of AlCoCrFeNi-WC-WS2 Composite Coating Prepared by Laser Cladding

Tribological Performance Enhancement Of Amorphous Hard Carbon-Films On Aisi-52100 Bearing Steel

Bonding Structure and Tribological Properties of Dlc Films Synthesized by Dual-Ion Beam Sputtering

Diamond-like Carbon Film Synthesized by Ion Beam Assisted Deposition and Its Tribological Properties

Structural And Tribological Characteristics Of Carbon Nitride Films Deposited By The Reactive Ionized-Cluster Beam Technique

Structural Characters and Tribological Properties of Diamondlike Carbon Films

Structure and tribological properties of carbon nitride films obtained by the reactive ionized cluster beam method

Structure and properties of carbon nitride films synthesized by low energy ion bombardment

Diamond-like Carbon Film on 20 CrNiMo Steel Prepared by Hollow-Cathode Glow Discharge

Effect of C 2 H 2 flow rate and a Ti/TiN/TiCN interlayer on the structure, mechanical and tribological properties of a-C:H films deposited using a hybrid PVD/PECVD process with an anode-layer ion source

Investigation of TiC films synthesized by low energy ion bombardment

Interface architecture for superthick carbon-based films toward low internal stress and ultrahigh load-bearing capacity

Structure and Mechanical Properties of A-C/(Alcrwtatinb)Cxny Composite Films

Mechanical Properties of Tungsten Doped Amorphous Hydrogenated Carbon Films Prepared by Tungsten Plasma Immersion Ion Implantation

Effects of the carbon-to-nitrogen ratio on the microstructure and properties of (CrNbSiTiZr)CxNy high-entropy carbonitride films

Improvement of Adhesion Strength of Amorphous Carbon Films on Tungsten Ion Implanted 321 Stainless Steel Substrate

Microstructure and Tribological Properties of Ti-contained Amorphous Carbon Film Deposited by DC Magnetron Sputtering

Structural Characterization And Properties Enhancement Of Diamond-Like Carbon-Films Synthesized Under Low-Energy Ne+ Bombardment

Microstructure and Tribological Behavior of Pulsed Laser Deposited A-Cnx Films

Studies of Diamond-Like Carbon Films Prepared by Ion Beam-Assisted Deposition