Abstract:The Ni-Mn-based shape memory alloys as a promising candidate of elastocaloric material has been reported in many literatures, especially on bulk samples. The as-spun ribbon, which has a larger surface area and is more efficient for heat transfer, is rarely studied and hence of importance. In the present work, we succeeded in producing very long as-spun Ni-Fe-Mn-(Al, In) ribbons, with around 300 mm in length. The microstructure and mechanical properties of these as-spun ribbons were thoroughly investigated by scanning electron microscopy / electron backscattered diffraction (SEM/EBSD), nanoindentation and 3-points bending experiments. Through SEM/EBSD analyses, the microstructure and texture of the as-spun ribbons were studied. A gradient in microstructure exists along the thickness direction (TD) of the ribbon, which is induced by the temperature gradient during fast rate solidification, resulting in fine equiaxed grains along the surface contacted with the rotating wheel in melt spinning process and elongated grains, respectively. Both equiaxed and elongated grains possess a strong {001} fiber texture (<001>//TD). Nanoindentation analyses show little variation of hardness between the two different microstructures. The ductility index of both Ni-Fe-Mn-Al and Ni-Fe-Mn-In ribbons are within the range of intermetallic materials. The substitution of In by Al allows to increase very slightly the ductility index, which can reach 0.75. The fine equiaxed grains show better tensile resistance than the elongated grains in 3-points bending test. The substitution of In by Al improves the maximum bending strain by a factor of 3. The maximum strain for Ni-Fe-Mn-Al as-spun ribbons can reach 3 % before fracture. Fractography shows that the intergranular fracture is the main damage mechanism in these as-spun ribbons.

Suppression of Γ Phase in Ni38Co12Mn41Sn9 Alloy by Melt Spinning and Its Effect on Martensitic Transformation and Magnetic Properties

MICROSTRUCTURE OF AS-MELT SPUN Al-Cu-Mg-Fe-Ni ALLOY AND ITS VARIATION IN CONTINUOUS HEAT TREATMENT

Structure and Magnetic Properties of Melt-Spun (Nd0.625ni0.375)(85)al-15 Ribbons

Suppression of γ phase and its effect on mechanical behavior of melt-spun and annealed Ni–Mn–Ga high-temperature shape memory alloys

Microstructure, martensitic transformation kinetics, and magnetic properties of (Ni50Mn40In10)100−xCox melt-spun ribbons

Phase structure and magnetostriction of Fe81Ga19 melt-spun ribbons

Ferromagnetism and Double Magnetic Phase Transitions in Rapidly Solidified Mn1.13ni1.03fe0.23ge0.61 Ribbons

Evolution from Amorphous to Nanocrystalline and Corresponding Magnetic Properties of Fe-Si-B-Cu-Nb Alloys by Melt Spinning and Spark Plasma Sintering

The phase structure and electrochemical properties of the melt-spun alloy Zr0.7Ti0.3Mn0.4V0.4Ni1.2

Crystallization Kinetics and Magnetic Properties of Fe73.5si13.5b9cu1nb1v2 Nanocrystalline Powder Cores

The Magnetic and Microstructural Evolution of Ni45mn24ga23co4cu4 Heusler Alloy Ribbons

Phase Stability and Magnetic-Field-Induced Martensitic Transformation in Mn-Rich Nimnsn Alloys

Structure and Magnetic Behaviours of Melt-Spun Ti1.4v0.6ni Alloy Containing Icosahedral Quasicrystalline Phase

Structure and Magnetic Properties of Melt-Spinning Pr(Fe0.6co0.4)(2) Alloys

Effect of Annealing on the Martensitic Transformation and Magnetocaloric Effect in Ni44.1Mn44.2Sn11.7 Ribbons

Multiscale microstructural evolution of Fe–Ni–Al–Ti alloy with high magnetization

Magnetic Properties and Magnetoresistance Effect in Ni43.3Mn31.5Fe11.7Al13.5 Ribbons

Magnetic-Field-Induced Reverse Transformation in A Nicomnsn High Temperature Ferromagnetic Shape Memory Alloy

Microstructure and correlated mechanical properties study of Ni-(Fe, Co)-Mn-(Al, In) as-spun ribbons

Structure and Martensitic Transformation in Rapidly Solidified CoNiAlFe Alloy

Phase transition of Ni55-xC0xMn20Ga25(8.5≤x≤11.0)alloys with different compositions and magnetic fields