Abstract:Applications of shape memory alloys require them have the ability to undergo back and forth through the solid-to-solid martensitic phase transformations for many times without degradation of properties (termed "reversibility"). Low hysteresis and small migration of transformation temperature under cycling are the macroscopic manifestation of high reversibility. By the crystallographic theory of martensite, materials with certain crystalline symmetry and geometric compatibility tend to form no-stressed transformation interface and have excellent functional stability. In the theory, several conditions that corresponding to extremely low hysteresis are specified. Stronger compatibility conditions which lead to even better reversibility have been theoretically proposed, those conditions are called "cofactor conditions". Recently, for the first time, experimental results find out the shape memory alloy Au30Cu25Zn45 that closely satisfy the cofactor conditions. Enhanced reversibility with thermal hysteresis of 2.045 degrees C, and the unusual riverine microstructure are found in Au30Cu25Zn45. However, their studies are limited to crystallographic analysis, and haven't provided enough details of microstructural evolution in martensitic transformation. Furthermore, it is the evolution of microstructures that leads to an extremely low thermal hysteresis in this alloy. Thus, making clear of evolution of microstructures in martensitic transformation in this alloy is of great importance. So, in the present work, the phase field method was applied, in which the microstructure is described by Landau theory of martensitic transformation, Khachaturyan-Shatalov's phase field microelasticity theory, and thermodynamics gradient to study the microstructural evolution of martensitic transformation in Au30Cu25Zn45, trying to figure out pathway of formation of the unusual microstructure with satisfying cofactor conditions. The simulation results show that during the martensitic transformation, quad-junctions composed of four different variants are formed. These junctions grow layer by layer, and the previously formed layer has larger size, thus leading to the formation of the experimentally reported "riverine" microstructure of martensite in Au30Cu25Zn45. Further analysis based on the crystallographic theory of martensitic transformation shows that in Au30Cu25Zn45 6 groups of variants can form such kind of quad-junction, and each group of variants can form 4 kinds of type 1/type 2 twin pairs and two kinds of compound twin pairs. All of the quad-junctions in this transformation are composed of four of those 6 twin pairs in each variant group, and the twin walls of these four twin pairs are perpendicular to each other.

Structure and Martensitic Transformation in Rapidly Solidified CoNiAlFe Alloy

Stabilization of deformed stress-induced martensite and its effect on shape memory effect in an Fe-Mn-Si-Ni-Co alloy

Microstructure of martensitic phase in the Co39Ni33Al28 shape memory alloys revealed by transmission electron microscopy

Martensitic Transformation and Magnetic Properties of Ti-doped NiCoMnSn Shape Memory Alloy

MICROSTRUCTURE AND PHASE TRANSFORMATION DURING ANNEALING OF RAPIDLY SOLIDIFIED Al-Fe-Ti-C ALLOY

Microstructural features, martensitic transformation, and functional properties of multicomponent Ti–Ni based shape memory alloys

Fe–Mn–Si–Cr–Ni Based Shape Memory Alloy: Thermal and Stress-Induced Martensite

High-temperature Metamagnetic Martensitic Transformation in Fairly Mn-rich Ni50−Co Mn37Ga13 (0 ≤x≤ 50) Alloys

Structural and Phase Transformations and Physical and Mechanical Properties of Cu-Al-Ni Shape Memory Alloys Subjected to Severe Plastic Deformation and Annealing

Transformation Behavior And Shape Memory Effect Of A Coal Alloy

Effects of cooling rate on martensitic transformation behavior and shape memory property for Ni-rich NiTiHf-Nb high-temperature shape memory alloy

Martensitic Transformation and Shape Memory Effect of NiCoMnSn High Temperature Shape Memory Alloy

Magnetic-Field-Induced Reverse Transformation in A Nicomnsn High Temperature Ferromagnetic Shape Memory Alloy

In situ study of non-equilibrium solidification of CoCrFeNi high-entropy alloy and CrFeNi and CoCrNi ternary suballoys

Microstructure of precipitates and magnetic domain structure in an annealed Co38Ni33Al29 shape memory alloy

Martensitic Transformation And Related Magnetic Effects In Ni-Mn-Based Ferromagnetic Shape Memory Alloys

Martensitic transformation and microstructure in Nb–Ru–Fe shape memory alloys

Magnetic-Field-Induced Martensitic Transformation in Mnniga : Co Alloys

Phase-Field Modelling of the Martensitic Transformation in Shape Memory Alloy Au30cu25zn45

Martensitic transformations and kinetics in Ti-Ni-Cu-Hf shape memory alloy

Microstructure, Martensitic Transformation and Superelasticity of Ti49.6Ni45.1Cu5Cr0.3 Shape Memory Alloy