Abstract:The present study investigated the microstructure, phase transformation behavior, and functional characteristics of the multicomponent Ti–Ni–Cu–Al–V shape memory alloys with the different annealing treatments. The results indicated that the multicomponent Ti–Ni–Cu–Al–V alloy annealed at 673 K/5 min was primarily composed of the B2 parent phase and Ti2(Ni,Cu) type precipitates distributing along the grain boundaries. As the annealing temperature increased and the annealing time extended, the chemical composition of the matrix changed slightly due to the precipitation of the Ti2(Ni,Cu) phase. Consequently, the martensitic phase (B19) gradually appeared and the volume friction of the martensite phase gradually increased. The phase constituents of the present Ti–Ni–Cu–Al–V shape memory alloy evolved from a B2 austenite phase to a B19 martensite phase with the annealing temperature/time increasing. Additionally, as the annealing temperature and time increased, the grain size also increased. The increment in annealing temperature and the prolongation of annealing time resulted in an increase of martensitic transformation temperatures as a result of the comprehensive effect of chemical composition, grain size, defects’ density, etc. Both yield strength and fracture strength decreased, while the elongation significantly increased (reaching 28% at 1123 K/60 min) with the annealing temperature rising and annealing time prolonging. Under the successively applied prestrain to 8% condition, the recoverable strain decreased from 4.2% to 1.7% for the annealed Ti–Ni–Cu–Al–V shape memory alloy with the annealing temperature/time increasing.

Microstructure of martensitic phase in the Co39Ni33Al28 shape memory alloys revealed by transmission electron microscopy

Stabilization of deformed stress-induced martensite and its effect on shape memory effect in an Fe-Mn-Si-Ni-Co alloy

Recent Electron Microscopy Results on Micro- and Nanostructured Ni-Ti-(X) Shape Memory Alloys

Microstructure of precipitates and magnetic domain structure in an annealed Co38Ni33Al29 shape memory alloy

Structure and Martensitic Transformation in Rapidly Solidified CoNiAlFe Alloy

Microstructure, Martensitic Transformation and Superelasticity of Ti49.6Ni45.1Cu5Cr0.3 Shape Memory Alloy

The Martensitic Transformation and Magnetic Properties in Ni 50− X Fe X Mn 32 Al 18 Ferromagnetic Shape Memory Alloys

Fe–Mn–Si–Cr–Ni Based Shape Memory Alloy: Thermal and Stress-Induced Martensite

Microstructure and mechanical behaviors of Co-Ni Magneto - shape - memory alloys

An in Situ TEM Study of the Size Effect on the Thermally Induced Martensitic Transformation in Nanoscale NiTi Shape Memory Alloy

Microstructural features, martensitic transformation, and functional properties of multicomponent Ti–Ni based shape memory alloys

Martensitic Transformation and Shape Memory Effect of NiCoMnSn High Temperature Shape Memory Alloy

Martensitic Transformation and Magnetic Properties of Ti-doped NiCoMnSn Shape Memory Alloy

Phase transition of Ni55-xC0xMn20Ga25(8.5≤x≤11.0)alloys with different compositions and magnetic fields

Martensitic Transformation And Related Magnetic Effects In Ni-Mn-Based Ferromagnetic Shape Memory Alloys

High-temperature Metamagnetic Martensitic Transformation in Fairly Mn-rich Ni50−Co Mn37Ga13 (0 ≤x≤ 50) Alloys

Structural and Phase Transformations and Physical and Mechanical Properties of Cu-Al-Ni Shape Memory Alloys Subjected to Severe Plastic Deformation and Annealing

Microstructure, Martensitic Transformation And Superelasticity Of T1(49) (6)N1(45 1)Cu(5)Cr(0 3) Shape Memory Alloy

Quantitative analysis of microstructure evolution in shape memory alloys during martensitic transformation

Magnetic-Field-Induced Martensitic Transformation in Mnniga : Co Alloys

Microstructure and Thermoelastic Martensitic Transformation in Ni-Low and -Rich Ni–Ti–Hf–Nb Hightemperature Shape Memory Alloys