Abstract:Since the period required for testing the atmospheric corrosion of steel is long, most studies have focused on the corrosion behavior in less than three years, making exploring long-term atmospheric corrosion particularly valuable. This study investigates the corrosion behaviors, corrosion models, and mechanical properties of Q235 welded steel pipes collapsing due to corrosion after 25-year service in an urban industrial atmospheric environment using SEM, XRD, electrochemical methods, 3-D noncontact surface profilometry, and static tensile testing. The typical morphologies of & alpha;-FeOOH, & gamma;-FeOOH, and Fe3O4 and the effect of the content of various corrosive materials on the corrosion rate of the steel pipes are identified and analyzed. Then, the influence of different corrosion degrees on the mechanical properties of the steel pipes is examined by considering the morphologies of the rust pits. The results show that the wetting-drying cycles affect the structures of the rust layers and their protective properties. The rust layers on the sheltered surface are thicker but less protective than those on the exposed surface. In the wet state, FeSO4 accelerates ion transfer, while Fe3O4 facilitates electron transfer. These processes collectively contribute to the corrosion of Q235 steel. Moreover, as the time-of-wetness of the rust layers on sheltered specimens increases, the corrosion rate of Q235 steel also accelerates. The corrosion model combines pitting and uniform corrosion and gradually changes from predominated by pitting to thickness as the corrosion degree increases. The corrosion morphology impacts the mechanical properties of the welded steel pipes, and the influences of the thickness loss and maximum rust pit depth on these properties are profound.

Corrosion Failure of Fittings in Electric Power Transmission Line in Typical Industrial Areas

Corrosion Failure Analysis of Fittings Used for Electrical Equipment in 220 kV Substation

Experimental and Numerical Analysis of the Impact of Corrosion on Pipeline Failure Pressure

Corrosion Behaviors and Mechanical Properties of Q235 Steel Pipes Collapsing Due to Corrosion after 25-Year Service in Urban Industrial Atmospheric Environment

Corrosion-Fatigue Analysis of Wires in Bridge Cables Considering Time-Dependent Electrochemical Corrosion Process

Analysis of Corrosion Causes of Ring Connection Fittings of ±800 kV Transmission Line

Research on Corrosion Causes of Common Metal Material in Power Grid

Corrosion Development of Carbon Steel Grids and Shear Connectors in Cracked Composite Beams Exposed to Wet-Dry Cycles in Chloride Environment.

Corrosion evolution of electric power equipment metal materials under industrial pollution environment with high heat and high humidity

Corrosion Behavior of Cu-Al Brazed Joints in the Salt Spray Environment

Influence of Air Pollution Factors on Corrosion of Metal Equipment in Transmission and Transformation Power Stations

Corrosion Evaluation of One Wet Desulfurization Equipment – Flue Gas Desulfurization Unit

Research on the Electrolytic Corrosion Problem of Porcelain Insulator's Hardware on UHVDC Transmission Line

Measurement and Analysis of Metal Fittings Electrolytic Corrosion Current and Charge of Porcelain and Glass Insulators on HVDC Transmission Lines

Failure analysis on synergistic effect of erosion and corrosion on failed fittings in specialty chemical plant. Part I: Elbows

Failure Analysis on Steel Structure Component for Outdoor Building of Substation

Corrosion Failure Analyses of 20 Steel Pipeline for Hydrogen Transportation in Swampland

Corrosion failure analysis of high strength grade super 13Cr-110 tubing string

Identification of the Selective Corrosion Existing at the Seam Weld of Electric Resistance-Welded Pipes

Corrosion Mechanism and Process of Hardware of Disc Suspension Type Insulators on ±800 Kv Transmission Lines

A laboratory study of the failure analysis of copper tube used in the air conditioning heat exchanger