Abstract:We demonstrated a simple and effective approach to fabricate dense and high aspect ratio sub-50 nm pillars based on phase separation of a polymer blend composed of a cross-linkable polysiloxane and polystyrene (PS). In order to obtain the phase-separated domains with nanoscale size, a liquid prepolymer of cross-linkable polysiloxane was employed as one moiety for increasing the miscibility of the polymer blend. After phase separation via spin-coating, the dispersed domains of liquid polysiloxane with sub-50 nm size could be solidified by UV exposure. The solidified polysiloxane domains took the role of etching mask for formation of high aspect ratio nanopillars by O-2 reactive ion etching (RIE). The aspect ratio of the nanopillars could be further amplified by introduction of a polymer transfer layer underneath the polymer blend film. The effects of spin speeds, the weight ratio of the polysiloxane/PS blend, and the concentration of polysiloxane/PS blend in toluene on the characters of the nanopillars were investigated. The gold-coated nanopillar arrays exhibited a high Raman scattering enhancement factor in the range of 10(8)-10(9) with high uniformity across over the wafer scale sample. A superhydrophobic surface could be realized by coating a self-assembled monolayers (SAM) of fluoroalkyltrichlorosilane on the nanopillar arrays. Sub-50 nm silicon nanowires (SiNWs) with high aspect ratio of about 1000 were achieved by using the nanopillars as etching mask through a metal-assisted chemical etching process. They showed an ultralow reflectance of approximately 0.1% for wavelengths ranging from 200 to 800 nm.

Fabrication of Length-Controlled Polymer Nanopillars Using Poly(Dimethylsiloxane) Filled Anodised Aluminium Oxide Templates

Simple and Cost-Effective Fabrication of Two-Dimensional Plastic Nanochannels from Silica Nanowire Templates

Optical Device Based on a Nanopillar Array by the Pattern Transfer of an Anodic Aluminum Oxide Membrane

Fabrication of Submicrometer Inp Pillars by Colloidal Lithography and Dry Etching

Self-masked high-aspect-ratio polymer nanopillars.

Controlled Fabrication of One-Dimensional Polymer Nanostructures Via Metallogel Template Polymerization

Porous Membrane Templated Synthesis of Polymer Pillared Layer

A Facile Method of Forming Nanoscale Patterns on Poly(ethylene Glycol)-Based Surfaces by Self-Assembly of Randomly Grafted Block Copolymer Brushes.

Wafer Scale Fabrication of Dense and High Aspect Ratio Sub-50 Nm Nanopillars from Phase Separation of Cross-Linkable Polysiloxane/Polystyrene Blend

Fabrication of hexagonally ordered nanopores in anodic alumina: An alternative pretreatment

Facile Engineering of Nano- and Microparticles Via Self-Assembly of Homopolymers

Size and Morphology Control of Highly-Ordered Nano-Silicon Pillar Fabricated by Direct Nanosphere Lithography

Fabrication and Characterization of Silica Nanotubes with Controlled Dimensions

Fabrication of Nanopillars Based on Silicon Oxide Nanopatterns Synthesized in Oxygen Plasma Removal of Photoresist

Fabrication of Ordered Arrays of Silicon Nanopillars at Selected Sites

Magnetically responsive polymer nanopillars with nickel cap

Templated Synthesis of Diamond Nanopillar Arrays Using Porous Anodic Aluminium Oxide (AAO) Membranes

Self-Formed High-Aspect-Ratio Polymer Nanopillars by RIE

Controlled Fabrication of Hierarchically Branched Nanopores, Nanotubes, and Nanowires.

Fabrication of Nanoporous Alumina Ultrafiltration Membrane with Tunable Pore Size Using Block Copolymer Templates

Ordering and Modification of Nanopores in Porous Anodic Aluminum Membranes