Austenite grain growth model for 30Cr2Ni4MoV steel during heating process and its application in heating specification for heavy forging

LI Cui-dong,CUI Zhen-shan,CHEN Fei

DOI: https://doi.org/10.3969/j.issn.1007-2012.2013.04.008

2013-01-01

Abstract:In order to investigate the austenite grain growth for 30Cr2Ni4MoV rotor steel during heating process, specimens were heated in a vacuum electric furnace at different holding temperatures (from 900°C to 1250°C) for different holding time (from 20 min to 300 min) and their austenite grain size were observed. It is found that there exist two turning points of temperature for grain growth in the range of 950°C to 1100°C. As the temperature increasing, the grain grows normally at first, while when the temperature is beyond 950°C, the grain growth turns to be slowly due to the strong pin-effects of the second phase. When the temperature is above 1050°C, the pin-effects become weak and grains grow evidently with the increasing of temperature. Based on the experimental results, mathematical models were established for different heating periods. According to these models, the effects of heating schedule to the grain growth and distribution is also discussed.