Abstract:The precipitate dissolution and grain growth during the solution treatment of Ce‐containing 15Cr–22Ni–1Nb steel are investigated. The phase transformation behavior of the Laves phase during hot forging and solution treatment is found and proved. The variation coefficient and 2σ principle in statistics are introduced to quantitatively characterize the abnormal grain growth. The established mathematical model of grain growth can be well applied to predict the average size of austenite grains in the steel after solution treatment. The precipitate dissolution and grain growth during the solution treatment of a newly developed Ce‐containing 15Cr–22Ni–1Nb steel are investigated. The dissolution of eutectic NbC is the result of the elements diffusion along the concentration gradients, and honeycomb (Fe,Cr,Ni,Si)2(Nb,Mo) Laves phase transforms into a more stable Mo2C‐type M2C carbide. As the cerium content is increased from 0 to 0.0630 mass%, the area fraction of eutectic precipitates in forged and solution‐treated 15Cr–22Ni steel is decreased first and then increased. For the steel with 0.0055 mass% cerium content, the substantial reduction in the area fraction of precipitates during hot forging and solution treatment is ascribed to the severe abnormal grain growth. In the case of 15Cr–22Ni steel with 0.0019 and 0.0630 mass% cerium content, the average size of austenite grains after solution treatment is reduced, the multipeak development of grain size distribution is restrained, the range of grain size distribution is narrowed, and the variation coefficient of grain growth, the critical size of abnormally grown grain, and the proportion of abnormally grown grain are all decreased. The variation coefficient of grain growth and the critical size of abnormally grown grain in the steel are increased as the solution time is extended, whereas the proportion of abnormally grown grain presents a general trend of reduction. The established mathematical model of grain growth in the paper can be well applied to predict and control the average size of austenite grains in 15Cr–22Ni steel after solution treatment.

Study on Austenite Grain Growth Behavior of GCr15 Bearing Steel

Austenite Grain Growth Behavior of A Gcr15 Bearing Steel Cast Billet in the Homogenization Heat Treatment Process

Austenite Growth Behavior and Prediction Modeling of Ti Microalloyed Steel

Austenite Grain Growth and its Equation in the Austenitizing Process for 700 MPa Grade High-Strength Steel

Three-Dimensional Cellular Automata Simulation of the Austenitizing Process in GCr15 Bearing Steel

Study of the kinetics of austenite grain growth by dynamic Ti-rich and Nb-rich carbonitride dissolution in HSLA steel: In-situ observation and modeling

The Influence of Temperature on the Austenite Grain Size and Microstructure of 4140 Steel

Austenite grain growth in tailored cooling rate experiment designed by numerical simulation for peritectic steel

Effect of heating temperature and holding time on carbide of GCr15SiMn bearing steel

Effect of billet microstructure and deformation on austenite grain growth in forging heating of a medium-carbon microalloyed steel

Notably Accelerated Nano-Bainite Transformation via Increasing Undissolved Carbides Content on GCr15Si1Mo Bearing Steel

Grain growth behaviors during solution annealing based on the heterogeneous microstructure in hot rolled nuclear grade austenitic stainless steel

Synergistic effect of well/over-tempered hierarchical martensitic structure and carbides (M 23 C 6 and MX) on austenite growth in 9Cr steel

Study on Decarburization Mechanism and Law of GCr15 Bearing Steel during Heat Treatment

Effect of Precipitated Particles on Austenite Grain Growth of Al- and Nb-Microalloyed 20MnCr Gear Steel

Reversed Austenite Growth Behavior of a 13%Cr-5%Ni Stainless Steel During Intercritical Annealing

Effect of the Normalizing Temperature on the Size and Homogeneity of Austenite Grain in 20CrMnTi Carburized Gear Steel

Effect of Austenite Grain Coarsening on Rheological Behavior of Low-carbon High-strength Steel at High Temperature

Effect of austenitizing temperature and holding time on austenite grain size of EQ70 steel

Prediction Model of Austenite Growth and the Role of MnS Inclusions in Non-Quenched and Tempered Steel

Precipitate Dissolution and Grain Growth during Solution Treatment of Ce‐Containing 15Cr–22Ni–1Nb Austenitic Heat‐Resistant Steel