Abstract:Sodium vanadate NaV6O15 (NVO) is one of the most promising cathode materials for sodium-ion batteries because of its low cost and high theoretical capacity. Nevertheless, NVO suffers from fast capacity fading and poor rate capability. Herein, a novel free-standing NVO/multiwalled carbon nanotube (MWCNT) composite film cathode was synthesized and designed by a simple hydrothermal method followed by a dispersion technique with high safety and low cost. The kinetics analysis based on cyclic voltammetry measurements reveals that the intimate integration of the MWCNT 3D porous conductive network with the 3D pillaring tunnel structure of NVO nanorods enhances the Na+ intercalation pseudocapacitive behavior, thus leading to exceptional rate capability and long lifespan. Furthermore, the NVO/MWCNT composite exhibits excellent structural stability during the charge/discharge process. With these benefits, the composite delivers a high discharge capacity of 217.2 mA h g–1 at 0.1 A g–1 in a potential region of 1.5–4.0 V. It demonstrates a superior rate capability of 123.7 mA h g–1 at 10 A g–1. More encouragingly, it displays long lifespan; impressively, 96% of the initial capacity is retained at 5 A g–1 for over 500 cycles. Our work presents a promising strategy for developing electrode materials with a high rate capability and a long cycle life.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c21328?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c21328</a>.SEM images of the NVO and NVO/MWCNTs, XRD patterns of as-prepared samples, TGA curve of NVO/MWCNTS, the first discharge/charge profiles of the NVO and NVO/MWCNTs at 0.1 A g–1, differential capacity dQ/dV plots versus voltage at 0.1 A g–1 of the NVO and NVO/MWCNTs, galvanostatic profiles of the NVO and NVO/MWCNTs at 1 A g–1, Raman modes of NVO and their assignments, comparison of current densities and discharge capacities between NVO and NVO/MWCNT electrodes, comparison of current densities and discharge capacities between this work and reported vanadium-based cathode materials, comparison of the capability of NVO/MWCNTs and other vanadium-based nanomaterials, differential capacity dQ/dV plots of NVO/MWCNTs versus voltage at 5 A g–1, NVO CV curves at different scan rates, XRD patterns of NVO/MWCNTS at 1 A g–1 after 200 cycles, XRD patterns of NVO/MWCNTs after 100 cycles at various current densities, the ex situ Raman spectra of NVO/MWCNTs at different charge/discharge states, and the corresponding galvanostatic charge and discharge curves at 0.2 A g–1, EDs elemental mapping of the NVO/MWCNT cathode after 200 cycles, digital image of the cycled freestanding NVO/MWCNT composite film after 200 cycles at 1 A g–1, and preparation of the freestanding NVO/MWCNT composite cathode (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c21328/suppl_file/am0c21328_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Characterization of Niobium and Vanadium Oxide Nanocomposites with Improved Rate Performance and Cycling Stability

Research on the Electrochemical Performance of Nanocomposites of Vanadium Oxide and Carbon Nanotubes As Cathode Materials

Electrochemical Performance of Nanocrystalline Li3V2(PO4)3/carbon Composite Material Synthesized by a Novel Sol–gel Method

Mixed metal engineering of V2O3 hollow nanoprisms encapsulated in N-doped carbon as anode for high-performance lithium-ion storage

Enhanced Stability of Vanadium-Doped Li1.2Ni0.16Co0.08Mn0.56O2 Cathode Materials for Superior Li-ion Batteries

Freestanding Sodium Vanadate/Carbon Nanotube Composite Cathodes with Excellent Structural Stability and High Rate Capability for Sodium-Ion Batteries

Investigation of structure and cycling performance of Nb-doped nickel-rich single-crystal ternary cathode materials

A crystalline nickel vanadium oxide@amorphous cobalt boride nanocomposites with enhanced specific capacity for hybrid supercapacitors

Improved Cyclability of Lithium-Ion Battery Anode Using Encapsulated V2o3 Nanostructures in Well-Graphitized Carbon Fiber

Niobium-Based Oxides Toward Advanced Electrochemical Energy Storage: Recent Advances and Challenges

Enhancement of Structural, Electrochemical, and Thermal Properties of High-Energy Density Ni-Rich LiNi0.85Co0.1Mn0.05O2 Cathode Materials for Li-Ion Batteries by Niobium Doping

Improving the Cycling Stability of LiNi 0.8 Co 0.1 Mn 0.1 O 2 by Enhancing the Structural Integrity via Synchronous Li 2 SiO 3 Coating

Enhanced rate performance and mitigated capacity decay of single-crystal LiNi0.8Co0.1Mn0.1O2 by the synergism of Mg doping and V2O5 coating

Improving the Performance of LiNi0.925Co0.065Mn0.01O2 via Ti4+& Nb5+ Co-Modifications

Preparation and Property Optimization of High Capacity O3-type NaNi0.4Fe0.2Mn0.4O2

Improving rate performance of cathode material Li1.2Mn0.54Co0.13Ni0.13O2 via niobium doping

Synthesis, Analysis and Characterization of Bimetallic Oxide NiO@NiCo2O4 Composite Nanoarchitectonics from Metal–organic Framework in Electrode Material

Competitive Redox Chemistries in Vanadium Niobium Oxide for Ultrafast and Durable Lithium Storage

Characterization and preparation of NiO-V2O5 composite film cathodes

Uncovering the Role of Nb Modification in Improving the Structure Stability and Electrochemical Performance of LiNi 0.6 Co 0.2 Mn 0.2 O 2 Cathode Charged at Higher Voltage of 4.5 V

Investigation of structure and cycling performance of Nb5+ doped high‐nickel ternary cathode materials