Abstract:A feasible strategy for dual‐bulk doping with Al and Nb in ultrahigh‐Ni oxide cathode materials of LiNi0.96Co0.04O2 (NC) is designed to stabilize the bulk structure, suppress oxygen release, and achieve superior electrochemical performance. This study offers a practical perspective for the development of high‐energy‐density and long‐life Li‐ion batteries. The pursuit of high energy densities propels the design of next‐generation nickel‐based layered oxide cathodes. The utilization of low‐cobalt, ultrahigh‐nickel layered oxide cathodes, and the extension of operating voltages promise enhanced energy density. However, stability and safety face challenges associated with nickel content, including structural degradation, lattice oxygen evolution, and thermal instability. In this study, a promising strategy of Al and Nb dual‐bulk‐doping is presented in high‐Ni cathode materials of LiNi0.96Co0.04O2 (NC) to stabilize the bulk structure, suppress oxygen release, and attain superior electrochemical performance at high voltages. The introduction of Al and Nb effectively raises the migration energy of Ni2+ into Li sites and stabilizes lattice oxygen through strengthened Al─O and Nb─O bonds. Furthermore, the substitution of high‐valence Nb ions reduces the charge depletion of lattice oxygen and induces an ordered microstructure. The Al and Nb dual‐bulk‐doping strategy mitigates strain and stress associated with the H2↔H3 phase transition, reducing the generation and propagation of microcracks. The resulting Li(Ni0.96Co0.04)0.985Al0.01Nb0.005O2 (NCAN) cathode exhibits superior cycling stability, with a capacity retention of 77.8% after 300 cycles, even when operating at a high‐voltage of 4.4 V, outperforming the NC (48.5%). This work provides a promising perspective for developing high‐voltage and high‐Ni cathode materials.

Enhancement of Structural, Electrochemical, and Thermal Properties of High-Energy Density Ni-Rich LiNi0.85Co0.1Mn0.05O2 Cathode Materials for Li-Ion Batteries by Niobium Doping

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

Structural Reinforcement through High-Valence Nb Doping to Boost the Cycling Stability of Co-Free and Ni-Rich LiNi 0.9 Mn 0.1 O 2 Cathode Materials

Mitigation of Cation Mixing of LiNiO2-based Cathode Materials by Li-doping for High-Performing Lithium-Ion Battery

Investigation of structure and cycling performance of Nb5+ doped high‐nickel ternary cathode materials

Effect of Nb 5+ Doping and LiNbO 3 Coating on the Structure and Surface of a LiNi 0.8 Mn 0.2 O 2 Cathode Material for Lithium-Ion Batteries

Improving rate performance of cathode material Li1.2Mn0.54Co0.13Ni0.13O2 via niobium doping

Effect of Nb5+ Doping and LiNbO3 Coating on the Structure and Surface of a LiNi0.8Mn0.2O2 Cathode Material for Lithium-Ion Batteries

Design of Nb5+-doped high-nickel layered ternary cathode material and its structure stability

1D Nb-doped LiNi1/3Co1/3Mn1/3O2 Nanostructures As Excellent Cathodes for Li-ion Battery

Electrochemical Kinetics and Cycle Stability Improvement with Nb Doping for Lithium-Rich Layered Oxides

Effects of Nb-doping on cycle life, self-discharge and crack resistance of Ni-rich LiNi0.94Co0.02Al0.04O2 cathode for Li-ion batteries

A new high-valence cation pillar within the Li layer of compositionally optimized Ni-rich LiNi 0.9 Co 0.1 O 2 with improved structural stability for Li-ion battery

Effect Of Niobium Doping On The Microstructure And Electrochemical Properties Of Lithium-Rich Layered Li[Li0.2ni0.2mn0.6]O-2 As Cathode Materials For Lithium Ion Batteries

Uncovering the Role of Nb Modification in Improving the Structure Stability and Electrochemical Performance of LiNi 0.6 Co 0.2 Mn 0.2 O 2 Cathode Charged at Higher Voltage of 4.5 V

High-Ni layered LiNi0.83Co0.11Mn0.06O2 modified by Nb for Li-ion batteries

Improving the Electrochemical Performances and Structural Stability of Ultrahigh-Ni Cathodes by Using Multi-Element Co-Doping Methods

Structural, electrochemical and cycling properties of Nb5+ doped LiNi0.8Co0.1Mn0.1O2 cathode materials at different calcination temperatures for lithium-ion batteries

Enhancing Structural Rigidity of Ultrahigh‐Ni Oxide Through Al and Nb Dual‐Bulk‐Doping for High‐Voltage Lithium‐Ion Batteries

Effects of Nb substitution on structure and electrochemical properties of LiNi0.7Mn0.3O2 cathode materials

Stabilizing Ni‐Rich LiNi 0.92 Co 0.06 Al 0.02 O 2 Cathodes by Boracic Polyanion and Tungsten Cation Co‐Doping for High‐Energy Lithium‐Ion Batteries