Abstract:The capture of carbon dioxide (CO 2 ) has attracted significant attention to reduce the emissions of greenhouse gases. However, the development of adsorptive materials remains to be a grand challenge. In this work, we successfully synthesized low silica X (LSX) zeolites from low-grade coal gangue (mass ratio of Al 2 O 3 /SiO 2 < 0.50), a major byproduct in the coal mining industry, without additional Si or Al source via a two-step activation method (TA). The LSX zeolite had a Si/Al mole ratio of 1.05 and a specific surface area of 634 m 2 /g. Synthesis conditions including calcination temperature, alkali fusion temperature, potassium hydroxide dosage and crystallization time were systematically investigated to understand the reaction mechanism and optimize the synthesis conditions. Results showed that quartz was the main impurity remained in the product and thermal activation at 1200 °C was beneficial to decompose quartz and suppress the formation of sodalite impurity. Zeolite A could be eliminated by optimizing potassium hydroxide dosage and crystallization time. Compared to the conventional alkali fusion method and calcination activation method, the zeolites synthesized via TA method had better crystallinity and higher purity. The LSX product showed a high CO 2 uptake of 4.99 mmol/g at 298 K and 1 bar. The ideal adsorption solution theory (IAST) selectivity of CO 2 /N 2 (15/85) and CO 2 /CH 4 (50/50) were 376 and 200 at 298 K and 1 bar, respectively. The separation performance was further demonstrated using Aspen Adsorption and results showed a high purity and recovery of 92.6% and 91.3%, respectively, while using 50% CO 2 in N 2 as the feed gas at the adsorption pressure of 211 kPa and desorption pressure of 22 kPa.

Zeolite Apgiia for Adsorption Based Carbon Dioxide Capture

Preparation and Co2 Sorption/Desorption of N-(3-Aminopropyl) Aminoethyl Tributylphosphonium Amino Acid Salt Ionic Liquids Supported into Porous Silica Particles

Experimental and Modeling Investigation on Post-Combustion Carbon Dioxide Capture Using Zeolite 13X-APG by Hybrid VTSA Process

Onsite Co2 Capture from Flue Gas by an Adsorption Process in A Coal-Fired Power Plant

Adsorption and Desorption of Carbon Dioxide and Nitrogen on Zeolite 5A

CO2 Adsorption by Polyamine-Based Protic Ionic Liquid-Functionalized Mesoporous Silica: Regenerability and Influence of Flue Gas Contaminants

Carbon dioxide capture by functionalized solid amine sorbents with simulated flue gas conditions.

Capture of CO2 from Flue Gases by a Combined Process of Vacuum and Temperature Swing Adsorption Using 13X-APG Zeolite

CO 2 capture using low silica X zeolite synthesized from low-grade coal gangue via a two-step activation method

Regulating the Si/Al ratio of GIS zeolite with bulky primary particles for selective CO 2 capture from hydrocarbons

A combined process of vacuum and temperature swing adsorption for post-combustion CO2 capture

Microporous Carbon Coated Zeolite Particles for Efficient Carbon Capture from Wet Flue Gas

Experimental evaluation of adsorption technology for CO2 capture from flue gas in an existing coal-fired power plant

Capture of CO 2 from Flue Gas by Vacuum Pressure Swing Adsorption Using Activated Carbon Beads

Multi-bed Vacuum Pressure Swing Adsorption for Carbon Dioxide Capture from Flue Gas

Monoethanolamine-Modified Attapulgite-Based Amorphous Silica for the Selective Adsorption of CO<sub>2</sub> from Simulated Biogas

High-temperature CO 2 adsorption on Li XZr YO Z ceramics

A Comprehensive Performance Evaluation of Temperature Swing Adsorption for Post-Combustion Carbon Dioxide Capture

Adsorption Equilibrium of CO2, CH4 and N2 on Zeolite 13X-APG

Synthesis of zeolite molecular sieve 13X from coal-fired slag for efficient room temperature CO2 adsorption

Recent Developments and Consideration Issues in Solid Adsorbents for CO 2 Capture from Flue Gas