Abstract:Post-combustion carbon capture is one of the feasible methods to reduce emission of carbon dioxide (CO2) from coal-fired power plants. The biggest challenge in this technology is reduction of energy consumption. This work proposes a hollow fiber based rapid temperature swing adsorption (RTSA) method for capturing CO2 from typical coal-fired power plants. The proposed RTSA approach can shorten the operating time and using low-grade energy for regeneration of adsorption elements. In this study, the tank-in-series model is used to simulate the RTSA process including adsorption and desorption periods. A dual-column operating procedure is then used to treat the flue gas continuously from the coal-fired power plants. Main operating variables including inlet gas volume flow rate (0.1 – 0.2 m3/s), abandon time (0 – 10 s), desorption temperature (80 - 120 °C) on key performance factors such as discharge gas purity, capture ratio of CO2, and energy consumption per unit CO2, etc. are investigated for reducing the energy consumption. This study found that the inlet gas volume flow rate will significantly affect the capture ratio, where smaller gas volume flow rate would be beneficial to increase capture ratio. The abandon time obviously affects the purity of the captured CO2, where the longer abandon time leads to higher purity. Desorption temperature affects both the capture ratio and purity of captured CO2. The higher the desorption temperature, the greater the purity and capture ratio. For one typical basic unit with dual-column hollow fibers, the study found that when the inlet gas volume flow rate is 0.12 m3/s, the desorption waiting time is 7 s, and the desorption temperature is 120 °C, both the CO2 purity and capture ratio can exceed 90 %. With considering the possibility of using steam in a low-pressure turbine as a source of heat required for Dual column vacuum RTSA (DC-vRTSA), the impact on the efficiency and stream data of typical coal-fired power plants are calculated. DC-vRTSA at 120°C, 100°C and 80°C will reduce the efficiency of coal-fired power plants by 8.2%, 6%, and 3.4%, respectively.

Onsite Co2 Capture from Flue Gas by an Adsorption Process in A Coal-Fired Power Plant

Post-combustion CO2 capture from a natural gas combined cycle power plant using activated carbon adsorption

Process design and adsorbent screening of VSA and exchanger type VTSA for flue gas CO 2 capture

Hollow fiber-based rapid temperature swing adsorption process for carbon capture from coal-fired power plants

Carbon dioxide capture by functionalized solid amine sorbents with simulated flue gas conditions.

Pilot-Scale Experimental Study on the CO2 Capture Process with Existing of SO2: Degradation, Reaction Rate, and Mass Transfer

Thermodynamic Exploration of Two-Stage Vacuum-Pressure Swing Adsorption for Carbon Dioxide Capture

Performance and economic viability assessment of a novel CO 2 adsorbent for manufacturing and integration with coal power plants

Analysis on Temperature Vacuum Swing Adsorption Integrated with Heat Pump for Efficient Carbon Capture

Experimental Study and Numerical Simulation on CO2 Capture from Flue Gas Using Amine-Based Absorbent in Coal-Fired Power Plant

CO 2 capture using low silica X zeolite synthesized from low-grade coal gangue via a two-step activation method

Development and testing of a new post-combustion CO2 capture solvent in pilot and demonstration plant

Recent Developments and Consideration Issues in Solid Adsorbents for CO 2 Capture from Flue Gas

Challenges of electric swing adsorption for CO(2) capture

Simulation of Capturing Carbon Dioxide from Flue Gas by Activated Carbon

Amine‐modified acid‐activated attapulgite as efficient and stable adsorbents for CO2 capture from flue gas

Research and Design Experience of a 150 Kt/A Co2 Capture and Purification Project in the Shaanxi Guohua Jinjie Power Plant

Removal of CO2 from Simulated Flue Gas of Power Plants by Membrane-Based Gas Absorption Processes

Industrial test of post combustion CO2 capture by reactive absorption with two new solvents in natural gas power plant

Experimental study of CO2 capture from air via steam-assisted temperature-vacuum swing adsorption with a compact kg-scale pilot unit

Simultaneous Absorption of SO2 and CO2 from Flue Gas Using Aqueous Ammonia