Abstract:ZSM-5 zeolite is a kind of high-value-added porous aluminosilicate zeolite. The use of the coal gasification slag utilization process by-product desilication liquid as a silicon raw material to replace the current raw materials such as water glass will help reduce production costs and achieve high-value utilization of solid waste. ZSM-5 zeolites for volatile organic compounds (VOCs) adsorption were prepared by a one-step hydrothermal method using the desilication solution prepared from coal gasification slag as the main silicon source and sodium source. The effects of crystallization reaction time, the crystallization temperature, the Na2O/SiO2 molar ratio, and the SiO2/Al2O3 molar ratio on the relative crystallinity and the specific surface area of the ZSM-5 zeolite were investigated and optimized. The optical reaction conditions were as follows: a crystallization time of 12 h, a crystallization temperature of 170 °C, a Na2O/SiO2 molar ratio of 0.2, and a SiO2/Al2O3 molar ratio of 200. The optimal ZSM-5 zeolite synthesized is hexagonal, with regular grains, a relative crystallinity of 101.48%, a specific surface area of 337.48 m2·g−1, and a pore volume of 0.190 cm3·g−1. And the optimal ZSM-5 zeolite was composed of SiO2 content of 97.52 wt%, Al2O3 content of 1.58 wt%, Na2O content of 0.33 wt%, and SiO2/Al2O3 molar ratio of 104.93. Na2O/SiO2 molar ratio is 0.0033. The results of static adsorption experiments show that the static adsorption capacities of ZSM-5 zeolite for p-xylene, benzene, toluene, and butyl acetate were 118.85, 69.98, 68.74, and 95.85 mg·g−1, respectively, which can effectively adsorb VOCs. The synthetic process of the ZSM-5 zeolite is a simple preparation process and short in synthesis time. The results of this study not only help to realize the high-value utilization of silicon components in solid waste, but also provide an economical and effective way to synthesize VOCs adsorption materials.

Synthesis of zeolite molecular sieve 13X from coal-fired slag for efficient room temperature CO2 adsorption

CO 2 capture using low silica X zeolite synthesized from low-grade coal gangue via a two-step activation method

Highly efficient synthesis of ZSM-5 zeolite by one-step microwave using desilication solution of coal gasification coarse slag and its application to VOCs adsorption

Synthesis of mesoporous sodalite from coal-fired slag for CO2 capture

Synthesis of cobalt-silicon molecular sieve with excellent CO2/N2 adsorption selectivity for dynamic CO2 capture

Sustainable Synthesis of Fe-MOR Zeolite for Efficient Capture of CO2

High-temperature CO 2 adsorption on Li XZr YO Z ceramics

Synthesis of Zeolite Molecular Sieve from Coal Gangue and Its Performance on CO2 Capture

Zeolite Apgiia for Adsorption Based Carbon Dioxide Capture

Enhanced CO2 Adsorption Performance on Hierarchical Porous ZSM-5 Zeolite

Preparation of Li4SiO4-based adsorbents with coal slag for high temperature cyclic CO2 capture

Solid Phase ZSM-5 Synthesis from Coal Gasification Coarse Slag

Synthesis of porous carbon/zeolite composites by low-temperature acid-alkaline leaching from coal gasification fine slag for adsorption of dye wastewater

Synthesis of ordered mesoporous silica from biomass ash and its application in CO2 adsorption

Controllable Preparation of Cubic Zeolite A and Application of Langmuir Model in Carbon Dioxide Adsorption

Hydrothermal synthesis of high crystallinity ZSM-5 zeolite from coal gasification coarse slag and mother liquor circulation for efficient coal chemical wastewater purification

Controlled design of Na-P1 zeolite/ porous carbon composites from coal gasification fine slag for high-performance adsorbent

A Hydrothermal Synthesis Process of ZSM-5 Zeolite for VOCs Adsorption Using Desilication Solution

Synthesis, characterisation and CO2 adsorption potential of NaA and NaX zeolites and hydrotalcite obtained from the same coal fly ash

Solid‐phase synthesis of silicalite‐1 molecular sieve based on fly ash and its CO2 adsorption performance

Zeolite-X synthesized from halloysite nanotubes and its application in CO2 capture