Abstract:Based on efficiency and environmental concerns, the development of porous carbon from waste and biomass materials has attracted extensive attention as a novel approach. In this study, poplar sawdust was an inexpensive carbon precursor, sulfur-containing waste liquid (SCWL) was used as a modifier to turn waste into treasure, and potassium oxalate (K2C2O4) was a mild activator, successfully prepared N, S, O co-doped new porous activated carbon with excellent CO2 capture performance. The heteroatom doping and pore structure can be controlled by using SCWL and K2C2O4, and adjusting the activation temperature. The best sample (PCSK-2-3-800) prepared with SCWL and K2C2O4 showed excellent CO2 adsorption performance, reaching 3.82 and 5.61 mmol/g under normal pressure at 25 and 0 °C, respectively. This is attributed to the synergy of porous structure and surface chemistry. The pore structure parameter results showed that K2C2O4 promotes the development of activated carbon pore structure. The specific surface area, micropore volume and narrow micropore volume of PCSK-2-3-800 are 1418 m2/g, 0.55 cm3/g and 0.43 mL/g, respectively. The characterization results of FTIR and XPS showed that the addition of SCWL can successfully introduce heteroatoms into the carbon skeleton, and form CO2-philic active sites on the surface of the porous carbon. Both aspects promoted the adsorption of CO2. In addition, the PCSK-2-3-800 sample has a moderate adsorption heat of 27.13 kJ/mmol, good adsorption selectivity of CO2 and N2 is 13, and excellent recyclability, which is very promising for CO2 separation or storage. This paper develops a sustainable scheme for the first-time using biomass and SCWL to develop a new solid carbon adsorbent, which provides useful information and inspiration for capturing CO2.

Synthesis of mesoporous sodalite from coal-fired slag for CO2 capture

Preparation of Li4SiO4-based adsorbents with coal slag for high temperature cyclic CO2 capture

Solid Phase ZSM-5 Synthesis from Coal Gasification Coarse Slag

Synthesis of Highly Efficient CaO-Based, Self-Stabilizing CO2 Sorbents via Structure-Reforming of Steel Slag.

Mesoporous silica-amine beads from blast furnace slag for CO2 capture applications

Green Synthesis of Nanosilica from Coal Fly Ash and Its Stabilizing Effect on CaO Sorbents for CO 2 Capture.

Hydrothermal Synthesis of Sodalite from Coal Fly Ash and Its Property Characterization

Hierarchical Porous Nanosilica Derived from Coal Gasification Fly Ash with Excellent CO2 Adsorption Performance

A cost-effective synthesis of heteroatom-doped porous carbon by sulfur-containing waste liquid treatment: As a promising adsorbent for CO2 capture

Insight into the synergism of residual carbon and slag particles in coal gasification fine slag on porous composites preparation for CO 2 capture

Facile Synthesis of MOF-5-derived Porous Carbon with Adjustable Pore Size for CO2 Capture

Alumina-extracted residue-derived silica foams with ultra-large pore volume for highly superior post-combustion CO2 capture

Developing a Novel CaO-Based Sorbent for Promoted CO2 Capture and Tar Reduction

CO 2 capture using low silica X zeolite synthesized from low-grade coal gangue via a two-step activation method

A green and scalable synthesis of highly stable Ca-based sorbents for CO2 capture

Performance of Coal Fly Ash Stabilized, CaO-based Sorbents under Different Carbonation–Calcination Conditions

SGCS-made Ultrafine CaO/Al2O3 Sorbent for Cyclic CO2 Capture

Study of calcium-based CO2 sorbent with high cycling stability derived from steel slag and its anti-sintering mechanism

Synthesis of porous carbon/zeolite composites by low-temperature acid-alkaline leaching from coal gasification fine slag for adsorption of dye wastewater

Lithium based high temperature sorbent from copper slag: Synthesis and CO 2 capture performance

Sustainable Synthesis of Fe-MOR Zeolite for Efficient Capture of CO2