Abstract:Amine-functionalized material has gained attention as a promising solid sorbent for CO2 capture. To obtain a high concentration of CO2 for storage, the thermal regeneration temperature of supported amine sorbents should be higher than 135 degrees C under pure CO2. The thermal stability of solid amine sorbents will become a problem of significance. This study investigated the thermal stability of supported amine sorbents at 140 degrees C from the perspective of amine types and reactors, with a focus on how to improve the thermal stability of solid amine sorbents. Supported amine sorbents were prepared by impregnating polyethylenimine (PEI) and tetraethylenepentamine (TEPA) of different molecular weights on silica particles. The thermal stability of these amine-functionalized silica particles was investigated as a function of temperature and molecular weight in a thermogravimetric analyzer (TGA) and in a single-fluidized-bed reactor. An important finding was that the supported amine sorbents exhibited much higher thermal stabilities in a single-fluidized-bed reactor than in a TGA for long-term operation (100 h) at 140 degrees C, because the evaporation of the amines could be greatly inhibited in the fluidized-bed reactor because of the presence of amine vapor in the gas phase. Based on this finding, a simple and effective method of inhibiting amine evaporation was proposed and demonstrated. Furthermore, continuous CO2 capture was demonstrated using PEI-impregnated silica particles in a laboratory-scale dual-fluidized-bed reactor (DFBR). The CO2 capture efficiency was approximately 80% in the absorber during 2 h of operation, and the sorbent still maintained good stability and performance.

Alumina-extracted residue-derived silica foams with ultra-large pore volume for highly superior post-combustion CO2 capture

Preparation and Co2 Sorption/Desorption of N-(3-Aminopropyl) Aminoethyl Tributylphosphonium Amino Acid Salt Ionic Liquids Supported into Porous Silica Particles

Fly ash-derived mesoporous silica with large pore volume for augmented CO 2 capture

Amine functionalized mesocellular silica foam as highly efficient sorbents for CO2 capture

Utilizing silica fume and synthetically produced mesoporous silicas for simulated flue gas CO2 adsorption

CO2 capture on aminosilane functionalized alumina-extracted residue of catalytic gasification coal ash

Facile fabrication of mesoporosity silica as support for solid amine CO2 adsorbents with enhanced adsorption capacity and kinetics

Carbon dioxide capture by functionalized solid amine sorbents with simulated flue gas conditions.

A novel approach to prepare efficient CO2 sorbents derived from alumina-extracted residue of coal ash

CO2 Adsorption by Polyamine-Based Protic Ionic Liquid-Functionalized Mesoporous Silica: Regenerability and Influence of Flue Gas Contaminants

Cost-effective carbon-based amine adsorbents for carbon capture: Equilibrium, kinetics and selectivity

CO2 high-temperature sorbent (Al, Fe, Ti) CO-doped Li4SiO4 from fly ash-derived SiO2 aerogel: In-situ synthesis, enhanced capture ability and long cycle stability

A novel preparation of microporous nanosilica derived from aluminum-extracted residue of coal fly ash for highly selective CO2 adsorption

Insight into the synergism of residual carbon and slag particles in coal gasification fine slag on porous composites preparation for CO 2 capture

Green Synthesis of Nanosilica from Coal Fly Ash and Its Stabilizing Effect on CaO Sorbents for CO 2 Capture.

Hierarchical Porous Nanosilica Derived from Coal Gasification Fly Ash with Excellent CO2 Adsorption Performance

Easily-synthesized and low-cost amine-functionalized silica sol-coated structured adsorbents for CO2 capture

Investigation of Thermal Stability and Continuous CO2 Capture from Flue Gases with Supported Amine Sorbent

Continuous CO2 Capture in Dual Fluidized Beds Using Silica Supported Amine

Amine-functionalized micron-porous polymer foams with high CO<sub>2</sub> adsorption efficiency and exceptional stability in PSA process

A novel preparation of solid amine sorbents for enhancing CO2 adsorption capacity using alumina-extracted waste