Abstract:ConspectusCarbon dioxide (CO2) capture and storage (CCS) is a means to enable the continued use of fossil fuels in the short term. In particular, postcombustion CO2 capture has attracted considerable attention because it can be retrofitted into existing power plants and industrial plants. Among various CO2 capture technologies, the absorption of CO2 using aqueous amines has been industrially employed for decades. However, such amine scrubbing technologies have inherent limitations of environmental and health concerns due to volatile amine loss, corrosion, and high energy demands for regeneration. To overcome these limitations, CO2 adsorption using solid adsorbents has emerged as a promising alternative due to its noncorrosiveness and low energy demand. Various amine-containing adsorbents have been synthesized and investigated for postcombustion CO2 capture. These materials are prepared by physically impregnating low-vapor-pressure amine polymers or by chemically grafting amines onto nanoporous materials. A wide variety of amine guests and nanoporous hosts (e.g., SiO2, Al2O3, zeolites, MOFs, and polymers) have been combined to develop advanced CO2 adsorbents.The design of CO2 adsorbents is a multifaceted puzzle that must ultimately consider integration with large-scale CO2 capture processes. Various engineering aspects need to be carefully considered. Unfortunately, a significant proportion of previous studies has primarily focused on the use of novel materials for improving the CO2 adsorption capacity. In this Account, we describe key challenges and solutions to develop energy-efficient and stable amine-containing adsorbents for postcombustion CO2 capture via temperature swing adsorption (TSA). We found that a high CO2 working capacity, often overemphasized in the literature, does not necessarily guarantee a low energy demand for CO2 capture. Suppressing coadsorption of H2O during the CO2 adsorption in humid flue gas is also a significant factor. Amine-containing adsorbents can be degraded through various pathways, including hydrothermal degradation of nanoporous hosts and chemical degradation of amine guests via urea formation and oxidation. To inhibit such degradation pathways, it is extremely important to properly design the nanoporous structures of the hosts and the molecular structures of the amine guests. By combining macroporous silica hosts, poly(ethylenimine) (PEI) functionalized with various alkyl epoxides, and phosphate-based oxidative stabilizers, we could synthesize adsorbents exhibiting low energy demands for CO2 capture and unprecedentedly high thermochemical stability under TSA conditions. The macroporous silica host synthesized by assembling fumed silica particles via spray-drying exhibited high hydrothermal stability and enabled uniform distribution of bulky amine polymers within its pores. The functionalization of PEI with alkyl epoxides converted its primary amines into hindered secondary amines, leading to a significant reduction in energy demand for TSA cycles and a remarkable improvement in long-term stabilities. The oxidative stability of amines could be drastically improved by adding phosphate metal-binding reagents, which can poison ppm-level metal impurities that catalyze amine oxidation. The present discussions will provide important insights into designing practical adsorbents for CO2 capture from engineering perspectives.

Amine-functionalized micron-porous polymer foams with high CO<sub>2</sub> adsorption efficiency and exceptional stability in PSA process

Polyethylenimine-Grafted Hkust-Type Mof/Poiyhipe Porous Composites (Pei@Pgd-H) As Highly Efficient Co(2 )Adsorbents

Design of Amine-Containing Nanoporous Materials for Postcombustion CO2 Capture from Engineering Perspectives

CO2 Adsorption by Polyamine-Based Protic Ionic Liquid-Functionalized Mesoporous Silica: Regenerability and Influence of Flue Gas Contaminants

Amine-functionalized disordered hierarchical porous silica derived from blast furnace slag with high adsorption capability and cyclic stability for CO2 adsorption

Cost-effective carbon-based amine adsorbents for carbon capture: Equilibrium, kinetics and selectivity

Development of composite amine functionalized polyester microspheres for efficient CO2 capture

High CO2 adsorption on amine-functionalized improved macro-/mesoporous multimodal pore silica

Adsorption Separation of CO2 from Flue Gas by Hyperbranched Solid-Amine

Epoxide-functionalized Tetraethylenepentamine Encapsulated into Porous Copolymer Spheres for CO2 Capture with Superior Stability

Carbon dioxide capture by functionalized solid amine sorbents with simulated flue gas conditions.

Facile fabrication of mesoporosity silica as support for solid amine CO2 adsorbents with enhanced adsorption capacity and kinetics

Development and characterization of amine-functionalized hyper-cross-linked resin for CO2 capture

Amine functionalized mesocellular silica foam as highly efficient sorbents for CO2 capture

A surfactant modified solid amine adsorbent to enhance CO 2 adsorption performance

Facile and efficient amine@AD-SiO 2 adsorbents from coal fly ash: Comparison of various amines for CO 2 adsorption capacity and cyclic stability

Adsorption of CO2 from Simulated Flue Gas on Pentaethylenehexamine-Loaded Mesoporous Silica Support Adsorbent

The Influence of Pore Size and Pore Structure of Silica-Based Material on the Amine-Modified Adsorbent for CO2 Capture

Physicochemical synergistic adsorption of CO2 by PEI‐impregnated hierarchical porous polymers

Amine-impregnated porous carbon–silica sheets derived from vermiculite with superior adsorption capability and cyclic stability for CO 2 capture

Molecule‐level Design to Form Pocket Structures for Improving Amine Efficiency in CO2 Capture