Abstract:Siliceous mesostructured cellular foams (MCF) impregnated with polyethylenimine (PEI) of various molecular weights and structures were evaluated as CO2 adsorbents. The MCF solid support consisted of a well-defined interconnected three-dimensional mesoporous structure with large cell diameter of 30.3 nm and large window diameter of 11.3 nm, filled with polyethylenimine up to 70 weight percent or about 22.3% nitrogen atom by weight of the adsorbents. While other mesoporous solid supports lost their porosity after PEI impregnation, our MCF solid support maintained its pore volume over the range of 1.12 to 1.64 cm(3) g(-1). The importance of the porosity of PEI-impregnated MCF adsorbents for high capacity CO2 adsorbents was demonstrated. The highest CO2 sorption capacity (180.6 mg-CO2/g-adsorbent or 393.6 mg-CO2/g-PEI at 75 degrees C) was obtained for silica supports loaded with 50 weight percent branched PEI with average molecular weight of 600 g mol(-1). Under dry atmospheric CO2 gas, this adsorbent reached the theoretical CO2 capacity of 0.50 mole-CO2 per mole-nitrogen within less than about 8 min, making this adsorbent one of the most effective CO2 adsorbents reported. Repeated multiple sorption cycles demonstrated good stability of this adsorbent for CO2 capture. The initial sorption kinetics determined the overall CO2 sorption capacity, which was limited by the formation of a carbamate layer as a result of the CO2-PEI complexation that due to inhibition of CO2 diffusion; the kinetics of "ionic" gelation of the impregnated PEI by CO2 controlled the overall performance of the CO2 adsorbents. At 75 degrees C, the operating temperature favored the molecular mobility of PEI and unrestricted diffusion of CO2 to allow the theoretical CO2 capacity of the PEI to be attained. Lower temperatures limited the mobilities of PEI and CO2 and the kinetics of "ionic" gel formation dominated, causing a lowered overall performance of the CO2 adsorbents. Overall, this study points to the importance of interconnected porous channel networks to optimize the performance of PEI-impregnated mesoporous silica particles.

Molecule‐level Design to Form Pocket Structures for Improving Amine Efficiency in CO2 Capture

Polyethylenimine-Grafted Hkust-Type Mof/Poiyhipe Porous Composites (Pei@Pgd-H) As Highly Efficient Co(2 )Adsorbents

An Immobilized Amine with Improved Cyclic Performance Prepared from Carboxyl Modified Mesoporous Silica for CO2 Capture

Improvement of Adsorbent Materials for CO 2 Capture by Amine Functionalized Mesoporous Silica with Worm-Hole Framework Structure

Atom-level interaction design between amines and support for achieving efficient and stable CO2 capture

Amine-functionalized Mesoporous Silica Derived from Natural Phyllosilicate for Efficient CO2 Adsorption

A general Energy-Efficient strategy for optimizing CO 2 Capture: Designing and harnessing the rapid adsorption kinetics of Amine-Impregnated adsorbents

Carbon Dioxide Capture by Amine-Impregnated Mesocellular-Foam-Containing Template

Mesocellular Silica Foam Supported Polyamine Adsorbents for Dry CO2 Scrubbing: Performance of Single Versus Blended Polyamines for Impregnation

Amine-modified Mesocellular Silica Foams for CO2 Capture

Experimental Testing and Mechanism Investigation of Amine-Functionalized Layered Vermiculite for CO2 Capture

Surfactant promoted solid amine sorbents for CO 2 capture

Underlying Roles of Polyol Additives in Promoting CO2 Capture in PEI/Silica Adsorbents

Experimental testing and mechanism investigation of amine-functionalized layered vermiculite for CO 2 capture

Impregnation of Polyethylenimine in Mesoporous Multilamellar Silica Vesicles for Co2 Capture: A Kinetic Study

Polyethylenimine-Impregnated Siliceous Mesocellular Foam Particles As High Capacity Co2 Adsorbents

Amine-impregnated Natural Inorganic Nanotubes Via Layer-by-layer Electrostatically Self-Assembly Approach for Efficient CO2 Adsorption

Amine functionalized mesocellular silica foam as highly efficient sorbents for CO2 capture

Amine-impregnated natural inorganic nanotubes via layer-by-layer electrostatically self-assembly approach for efficient CO 2 adsorption

The Influence of Pore Size and Pore Structure of Silica-Based Material on the Amine-Modified Adsorbent for CO2 Capture

Enhanced Kinetics for CO2 Sorption in Amine-Functionalized Mesoporous Silica Nanosphere with Inverted Cone-Shaped Pore Structure