Abstract:Using the cost-effective, renewable and nano-sized of citric acid pretreatment rice husk ash (CRHA) as silicon source, high efficient Li4SiO4 (lithium orthosilicate)-based sorbents (CRHA-Li4SiO4) for high-temperature CO2 capture were prepared through the solid-state reaction at lower temperature (700 degrees C). Two typical raw materials (nano-structured Aerosil and crystalline Quartz powders) were used to synthesize Li4SiO4 sorbents (Aerosil-Li4SiO4 and Quartz-Li4SiO4) for comparison purposes. The phase composition behavior, surface area, and morphology of the silicon sources, heat treated raw materials and as-received Li4SiO4 sorbents were studied by analytical techniques. The CO2 adsorption capacity and adsorption-desorption performance were tested by the thermo-gravimetric analyses (CO2 atmosphere) and a fixed bed reactor, respectively. Compared with the case of its original samples, the morphology of heat treated raw materials had a greater effect on the phase composition, microstructure, special surface area and CO2 adsorption properties of their resulting sorbents. Although the calcined Quartz sample maintained the structure of micron particles, its reactivity was not enough to react completely with Li2CO3. Due to the greater reactivity of nanoparticles, Aerosil-Li4SiO4 presented pure of Li4SiO4 whereas it obtained large particles with dense morphology, which was coming from the pronounced fusing of silica nanoparticles during the calcined process. Conversely, CRHA-Li4SiO4 achieved porous agglomerates of submicron particles resulting from a high anti-sintering character of its calcined CRHA. This more favorable structure of CRHA-Li4SiO4 could lead to the higher CO2 adsorption capacity of 30.5 wt% (6.92 mmol/g Li4SiO4, corresponding to 83.1% efficiency), faster kinetic behavior and better regenerability (its adsorption capacity only decreased 2.1 wt% from the first cycle to the 15th cycle), which was illustrated by the thermogravimetric analyses and fix bed results. (C) 2014 Elsevier Ltd. All rights reserved.

Hierarchical Porous Nanosilica Derived from Coal Gasification Fly Ash with Excellent CO2 Adsorption Performance

Synthesis of a Porous Nano‐CaO/MgO‐Based CO2 Adsorbent

Preparation of Hydrophobic Hierarchical Pore Carbon–silica Composite and Its Adsorption Performance Toward Volatile Organic Compounds

Synthesis of ordered mesoporous silica from biomass ash and its application in CO2 adsorption

A novel preparation of microporous nanosilica derived from aluminum-extracted residue of coal fly ash for highly selective CO2 adsorption

Enhanced CO2 Adsorption Performance on Hierarchical Porous ZSM-5 Zeolite

CO2 Adsorption by Polyamine-Based Protic Ionic Liquid-Functionalized Mesoporous Silica: Regenerability and Influence of Flue Gas Contaminants

A Green and Facile Synthesis of Ordered Mesoporous Nanosilica Using Coal Fly Ash

From Typical Silicon-Rich Biomass to Porous Carbon-Zeolite Composite: A Sustainable Approach for Efficient Adsorption of CO2.

Solid‐phase synthesis of silicalite‐1 molecular sieve based on fly ash and its CO2 adsorption performance

Utilizing silica fume and synthetically produced mesoporous silicas for simulated flue gas CO2 adsorption

One-step Synthesis of Silicon Carbide Foams Supported Hierarchical Porous Sludge-Derived Activated Carbon As Efficient Odor Gas Adsorbent.

Facile Synthesis of MOF-5-derived Porous Carbon with Adjustable Pore Size for CO2 Capture

Controlled design of Na-P1 zeolite/ porous carbon composites from coal gasification fine slag for high-performance adsorbent

Facile fabrication of mesoporosity silica as support for solid amine CO2 adsorbents with enhanced adsorption capacity and kinetics

Porous silica synthesis out of coal fly ash with no residue generation and complete silicon separation

Tailored Pore Structure of ZIF-8/chitosan-derived Carbonaceous Adsorbent by Introducing Mesoporous Silica Nanoparticles for Superior CO 2 Uptake

Enhancement of Reactivity in Li4SiO4-based Sorbents from the Nano-Sized Rice Husk Ash for High-Temperature CO2 Capture

Synthesis of Hierarchically Ordered Porous Silica Materials for CO2 Capture: The Role of Pore Structure and Functionalized Amine

Enhanced CO2 Adsorption Property of Amine In-Situ Hybrid SiO2 Aerogels by the Incorporation of Micropores

Green Synthesis of Nanosilica from Coal Fly Ash and Its Stabilizing Effect on CaO Sorbents for CO 2 Capture.