Abstract:Introduction Capacitive deionization (CDI), which is ion electrosorption onto the surface of porous materials to remove ions from aqueous solutions, may serve as an energy-efficient alternative for the desalination of brackish water comparing with conventional desalination methods such as membrane separation and thermal distillation [1]. The CDI process operates at low direct voltages. Ions adsorbed are hold in the electrical double layers (EDL) near charged surface of an electrode and could be released back into bulk solution by canceling the potential difference between the electrodes [1]. No additional chemicals are required for regeneration. The part of discharging energy is able to be restored for the energy recycling. A prerequisite for the high deionization efficiency of CDI method is the demand for the high electrosorptive capacity endowed by the electrode materials. To obtain the objective, it is important that a large surface area is created and thus typical materials such as high specific surface area (SSA) materials are used. High SSA, a key factor of electrosorptive capacity, is determined mainly by the contribution of the surface area of mesopores and micropores present in carbon materials. SSA is explicitly related to pore size, thus it is especially important to understand its effect on electrosorptive capacity. The latest research in the related field of electric double layer capacitors (EDLC) has shown an anomalous increase in carbon capacitance at pore sizes less than 1 nm [2]. In CDI, the pore openings of activated carbons were controllably tuned to exhibit excellent electrochemical selectivity for ions [3]. Electrosorptive performance with modified activated carbon cloth as CDI electrodes was also investigated [4]. Up to now, more emphasis is focused on high SSA of porous carbon materials with the order of 10 m/g. Activated carbon fibers (ACFs) are typical microporous materials with large surface areas and good conductivity along fiber axis. Thus they can serve as candidate for active component of CDI electrodes. The aim in present work is to identify effect of SSA on capacitive electrosorptive capacity using activated carbon materials electrodes.

Highly mesoporous activated carbon electrode for capacitive deionization

Electrochemical capacitive desalination behavior of activated carbon fibers

Chitosan-based Activated Carbon As Economic and Efficient Sustainable Material for Capacitive Deionization of Low Salinity Water.

Capacitive deionization(CDI)technology for desalination of sea water:properties of carbon electrode materials made of activated carbon and ion-exchange membranes

Unleashing the power of capacitive deionization: Advancing ion removal with biomass-derived porous carbonaceous electrodes

Preparation of activated carbon electrode for capacitive deionization based on PTFE emulsion spraying technology

Effects of pore structure on the high-performance capacitive deionization using chemically activated carbon nanofibers

Walnut shell-derived porous carbon with MgSO 4 modification for high-performance capacitive deionization

Enhancing the Desalination Performance of Capacitive Deionization Using a Layered Double Hydroxide Coated Activated Carbon Electrode

Enhanced capacitive deionization of toxic metal ions using nanoporous walnut shell-derived carbon

Study on the functionalization of activated carbon and the effect of binder toward capacitive deionization application

The regulation of biochar surface potential to achieve rapid capacitive deionization

Recent progress in graphene-based and ion-intercalation electrode materials for capacitive deionization

Activated Carbon Aerogel as an Electrode with High Specific Capacitance for Capacitive Deionization

Optimization of activated carbon electrodes for desalination using capacitive deionization technique: strategies toward capacitive deionization cell refreshment

Utilization of peanut shells for the fabrication of high-performance activated carbon electrodes in capacitive deionization

Asymmetric Electrodes Constructed with PAN-Based Activated Carbon Fiber in Capacitive Deionization

A Study of the Effect of Carbon Characteristics on Capacitive Deionization (CDI) Performance

Capacitive deionization by ordered mesoporous carbon: Electrosorption isotherm, kinetics, and the effect of modification

Zeolitic Imidazolate Framework-8 Derived Two-Dimensional N-doped Amorphous Mesoporous Carbon Nanosheets for Efficient Capacitive Deionization

Desalination by Capacitive Deionization Process Using Nitric Acid-Modified Activated Carbon As the Electrodes