Abstract:Introduction Capacitive deionization (CDI), which is ion electrosorption onto the surface of porous materials to remove ions from aqueous solutions, may serve as an energy-efficient alternative for the desalination of brackish water comparing with conventional desalination methods such as membrane separation and thermal distillation [1]. The CDI process operates at low direct voltages. Ions adsorbed are hold in the electrical double layers (EDL) near charged surface of an electrode and could be released back into bulk solution by canceling the potential difference between the electrodes [1]. No additional chemicals are required for regeneration. The part of discharging energy is able to be restored for the energy recycling. A prerequisite for the high deionization efficiency of CDI method is the demand for the high electrosorptive capacity endowed by the electrode materials. To obtain the objective, it is important that a large surface area is created and thus typical materials such as high specific surface area (SSA) materials are used. High SSA, a key factor of electrosorptive capacity, is determined mainly by the contribution of the surface area of mesopores and micropores present in carbon materials. SSA is explicitly related to pore size, thus it is especially important to understand its effect on electrosorptive capacity. The latest research in the related field of electric double layer capacitors (EDLC) has shown an anomalous increase in carbon capacitance at pore sizes less than 1 nm [2]. In CDI, the pore openings of activated carbons were controllably tuned to exhibit excellent electrochemical selectivity for ions [3]. Electrosorptive performance with modified activated carbon cloth as CDI electrodes was also investigated [4]. Up to now, more emphasis is focused on high SSA of porous carbon materials with the order of 10 m/g. Activated carbon fibers (ACFs) are typical microporous materials with large surface areas and good conductivity along fiber axis. Thus they can serve as candidate for active component of CDI electrodes. The aim in present work is to identify effect of SSA on capacitive electrosorptive capacity using activated carbon materials electrodes.

Utilization of peanut shells for the fabrication of high-performance activated carbon electrodes in capacitive deionization

Chitosan-based Activated Carbon As Economic and Efficient Sustainable Material for Capacitive Deionization of Low Salinity Water.

Electrochemical capacitive desalination behavior of activated carbon fibers

Walnut shell-derived porous carbon with MgSO 4 modification for high-performance capacitive deionization

ZnFe 2 O 4 -infused hierarchically porous carbon nanofiber electrode for enhanced capacitive deionization

Enhanced capacitive deionization of toxic metal ions using nanoporous walnut shell-derived carbon

Highly mesoporous activated carbon electrode for capacitive deionization

Unleashing the power of capacitive deionization: Advancing ion removal with biomass-derived porous carbonaceous electrodes

Preparation of activated carbon electrode for capacitive deionization based on PTFE emulsion spraying technology

Expeditious and Effectual Capacitive Deionization Performance by Chitosan-Based Carbon with Hierarchical Porosity

Biobased polyporphyrin derived porous carbon electrodes for highly efficient capacitive deionization

Pine-derived porous carbon for efficient capacitive deionization and the role of its hierarchical pore structure

Ion-doped polypyrrole coupled core-shell hierarchical porous carbon electrode material with high desalination capacity for capacitive deionization

Use of steam to prepare super active carbon with large pore volume for efficient capacitive deionization

Porous carbon materials derived from biomass waste as efficient electrodes for capacitive deionization desalination

Activated Carbon Aerogel as an Electrode with High Specific Capacitance for Capacitive Deionization

Pine Pollen Derived Porous Carbon with Efficient Capacitive Deionization Performance

Hierarchical Porous Carbons Derived from Porous Biomass for High-Performance Capacitive Deionization

MnO 2 -modified soybean root derived porous carbon with excellent capacity deionization

Platanus acerifolia (Aiton) Willd. fruit-derived nitrogen-doped porous carbon as an electrode material for the capacitive deionization of brackish water

A novel layered activated carbon with rapid ion transport through chemical activation of chestnut inner shell for capacitive deionization