Abstract:Nucleant substrates may induce formation of several quasilayers in the liquid metals in contact with the solid substrates. These liquid layers, called prenucleation layers (PNLs), normally form above the liquidus temperatures of the metal alloys and thus are believed to significantly affect the heterogeneous nucleation mechanism. In this work, a comprehensive study of the (0001) sapphire-liquid Al interfaces was conducted using the ab initio molecular dynamics method to unveil the key factors determining the substrate-liquid metal interfacial structural features, focusing primarily on revealing the underlying mechanisms of the PNL formation. Two types of (0001) sapphire surfaces, i.e., nonhydroxylated and hydroxylated surfaces, were investigated. Essentially the same equilibrated interfacial structure was observed for all the interfaces with the nonhydroxylated sapphire surfaces, featuring an Al-rich termination of the substrates and two distinguishable adjacent PNLs. These typical structural features are similar to the (root 31 x root 31) R +/- 9 degrees reconstructed surface, which supports the previous experimental observation that the presence of liquid Al promotes the reconstruction of the (0001) sapphire surface. A completely different structure was found at the interface with fully hydroxylated sapphire surface: the PNLs are absent, replaced by an Al-depleted region. To unveil the factors influencing the interfacial structure, we first analyzed the nature of interfacial bonding. Strong covalent bonds were observed between the nonhydroxylated sapphire surfaces and liquid Al, which constitute a relatively large proportion of the interfacial bonds at such systems. On the contrary, weak van der Waals force is the primary interaction between the fully hydroxylated sapphire surface and liquid Al. Then we characterized the dynamical behaviors of the substrate surfaces in the substrate-liquid Al interfaces. Better mobility and larger vibration amplitude were found for the fully hydroxylated sapphire surface compared to the equilibrated nonhydroxylated sapphire surface. We demonstrated that both the stronger bonding strength and the lower mobility of interfacial atoms contribute to the formation of the PNLs at the nonhydroxylated sapphire-liquid Al interfaces. Finally, the formation mechanism of the PNLs at the substrate-liquid metal interface is summarized.

Wetting and reaction promoted by ultrasound between sapphire and liquid Al-12Si alloy.

Unveiling The Influence Of Interfacial Bonding And Dynamics On Solid/Liquid Interfacial Structures: An Ab Initio Molecular Dynamics Study Of (0001) Sapphire-Liquid Al Interfaces

Interfacial Structure and Formation Mechanism of Ultrasonic-Assisted Brazed Joint of Sic Ceramics with Al-12si Filler Metals in Air

Crystallization Orientation Relationship of Dip-Coated Al Film on Sapphire

Ultrasonic-assisted wetting and soldering of AlN ceramic by using a nonactive solder (Sn9Zn) in air

Microstructure evolution and interfacial bonding mechanisms of ultrasonically soldered sapphire/Al dissimilar joints using Sn-based solders

Ultrasonic-assisted transient liquid phase bonding of SiC ceramic and aluminum alloy using an inactive Zn interlayer

Ultrasonic effect mechanism on transient liquid phase bonding joints of SiCp reinforced Mg metal matrix composites using Zn-Al-Zn multi-interlayer.

Bonding mechanism in ultrasonic-assisted soldering of ZrO2 and 304 stainless steel using a micro-alloyed active solder alloy

Heterogeneous material joining of sapphire and TC4 alloy with a functionally graded interface

Microstructure and Mechanical Property of Titanium Film-Modified Sapphire/High Nb-TiAl Alloy Joints Using Ag-Cu Filler by Vacuum Brazing

The wetting behavior of Al/Sn under ultrasonic action

Microstructure and properties of an Al–Ti–Cu–Si brazing alloy for SiC–metal joining

Sonocapillary and wetting mechanism during ultrasonic brazing porous Si3N4 ceramics in air

AFM and XPS Studies on Material Removal Mechanism of Sapphire Wafer During Chemical Mechanical Polishing (CMP)

Metallization on Sapphire and Low-Temperature Joining with Metal Substrates

Interaction of Si3N4 Ceramics and Liquid Aluminum at Interface without Oxidation

A Novel Lapping Process for Single-Crystal Sapphire Using Hybrid Nanoparticle Suspensions

Laser-induced dynamic wetting behavior and interfacial evolution of AlSi5 alloy on Ti6Al4V alloy

Sapphire joining using Ag70.5Cu27.5Ti2 brazing filler metal

In‐situ synthesis of 15R‐Sialon from Al‐Si 3 N 4 ‐Al 2 O 3 composite at 1500°C via liquid‐phase sintering