Abstract:Energy-dispersive small-angle X-ray scattering (ED-SAXS) with an innovative design of cone collimation based on an ellipsoidal single-bounce capillary (ESBC) and a polycapillary parallel X-ray lens (PPXRL) had been explored. Using this new cone collimation system, scattering angle 2 theta has a theoretical minimum angle related to the mean half-opening angle of the hollow cone beam of 1.42 mrad, and with the usable X-ray energy ranging from 4 to 30 keV, the resulting observable scattering vector q is down to a minimum value of about 0.003 angstrom(-1) (or a Bragg spacing of about 2100 angstrom). However, the absorption of lower energies by X-ray capillary optics, sample transmission, and detector response function limits the application range to lower energy. Cone collimation ED-SAXS experiments carried out on pure water, Lupolen, and in situ temperature-dependent measurement of diacetylenic acid/melamine micelle solid were presented at three different scattering angles 2 theta of 0.18 degrees, 0.70 degrees and 1.18 degrees to illustrate the new opportunities offered by this technique as well as its limitations. Also, a comparison has been made by replacing the PPXRL with a pinhole, and the result shows that cone collimation ED-SAXS based on ESBC with PPXRL was helpful in improving the signal-to-noise ratio (i.e., reducing the parasitic background scattering) than ESBC with a pinhole. The cone collimation instrument based on X-ray capillary optics could be considered as a promising tool to perform SAXS experiments, especially cone collimation ED-SAXS has potential application for the in situ temperature-dependent studying on the kinetics of phase transitions. Published by AIP Publishing.

Performance of Polycapillary X-Ray Optics for Confocal Energy-Dispersive Small-Angle X-Ray Scattering

Performances for confocal X-ray diffraction technology based on polycapillary slightly focusing X-ray optics

Grating-Based X-Ray Phase Contrast Imaging With a Polycapillary Semilens

Characterization of polycapillary X-ray lens for application in confocal three-dimensional energy-dispersive micro X-ray diffraction experiments

In Situ Analysis of Electrocrystallization Process of Metal Electrodeposition with Confocal Energy Dispersive X-ray Diffraction Based on Polycapillary X-ray Optics

An Energy Dispersive Micro X-ray Diffractometer Based on a Combined System of Polycapillary Optics

Measurement of Grain Size of Polycrystalline Materials with Confocal Energy Dispersive Micro-X-Ray Diffraction Technology Based on Polycapillary X-Ray Optics

Energy-Dispersive Small-Angle X-Ray Scattering With Cone Collimation Using X-Ray Capillary Optics

Performances of Capillary X-ray Optics for Confocal Three-Dimensional Micro-X-ray Fluorescence Technology

Study on Energy Dispersive X-Ray Scattering Technique with Polycapillary X-Ray Optics for Identification of Sorts of Liquids

Characterization of a polycapillary focusing X-ray lens for application in spatially resolved EXAFS experiments

Focal Construct Geometry for High Intensity Energy Dispersive X-Ray Diffraction Based on X-Ray Capillary Optics

Development of a New X-ray Scattering Instrument Based on Two Polycapillary X-ray Optics

Full-Field Transmission X-Ray Imaging With Confocal Polycapillary X-Ray Optics

Application of a Monolithic Polycapillary X-ray Lens in EXAFS Experiments

Application of a Polycapillary X-Ray Optics in High Pressure XAFS

Focusing Polycapillary To Reduce Parasitic Scattering For Inelastic X-Ray Measurements At High Pressure

Confocal X-ray Technology Based on Capillary X-ray Optics

High Energy Resolution Xrmf Spectrometer Using Polycapillary X-Ray Optics And Pspc

Performance of Polycapillary X‐ray Lens for X‐ray Sources with Various Spot Sizes

Combined Optic System Based on Polycapillary X-ray Optics and Single-Bounce Monocapillary Optics for Focusing X-rays from a Conventional Laboratory X-ray Source