Abstract:A method for fabricating scalable antireflective nanostructures on polymer surfaces (polycarbonate) is demonstrated. The transition from small scale fabrication of nanostructures to a scalable replication technique can be quite challenging. In this work, an area per print corresponding to a 2-inch-wafer, is presented. The initial nanopatterning is performed on SiC in a 2-step process. Depending on the nanostructures the transmission of the SiC surface can be increased or suppressed (average height of nanostructures ~300nm and ~600nm, respectively) while the reflectance is decreased, when compared to a bare surface. The reflectance of SiC can be reduced down to 0.5% when the ~600nm nanostructures are applied on the surface (bare surface reflectance 25%). The texture of the green SiC color is changed when the different nanostructures are apparent. The ~600nm SiC nanostructures are replicated on polymer through a process flow that involved hot embossing and galvanization. The resulted polymer structures have similar average height and exhibit more rounded edges than the initial SiC nanostructures. The polymer surface becomes antireflective and hydrophobic after nanostructuring. The contact angle changes from 68 (bare) to 123 (nanostructured) degrees. The optical effect on the polymer surface can be maximized by applying a thin aluminum (Al) layer coating on the nanostructures (bare polymer reflectance 11%, nanostructured polymer reflectance 5%, Al coated nanostructured polymer reflectance 3%). The optical measurements were performed with an integrating sphere and a spectrometer. The contact angles were measured with a drop shape analyzer. The nanostructures were characterized with scanning electron microscopy.

Controllable formation and optical characterization of silicon nanocone-forest using SF6/C4F8 in cyclic etching-passivation process

Formation Mechanism of Multi-Functional Black Silicon Based on Optimized Deep Reactive Ion Etching Technique with SF 6 /C 4 F 8

Low Reflectance Gaas Nano-Cones Fabricated By Colloidal Lithography For Solar Cells

Fabrication of the Highly Ordered Silicon Nanocone Array With Sub-5 nm Tip Apex by Tapered Silicon Oxide Mask

Nano-Structured Silicon: Fabrication, Optical Property, Defect States and Device Application

Fabrication and optical properties of silicon nanopillar arrays with controllable surface structures

A route to engineered high aspect-ratio silicon nanostructures through regenerative secondary mask lithography

CMOS-Compatible Wafer-Level Double-layer Silicon Nanograss Through Reactive Ion Etching for Applications in Optics

Preparation of composite micro/nano structure on the silicon surface by reactive ion etching: Enhanced anti-reflective and hydrophobic properties

Controllable Si (100) Micro/nanostructures by Chemical-Etching-assisted Femtosecond Laser Single-Pulse Irradiation

Fabrication of Micro/Nano Dual-Scale Structures by Improved Deep Reactive Ion Etching

Periodic Silicon Nanocones Arrays with Controllable Dimensions Prepared by Two-Step Etching Using Nanosphere Lithography and NH4OH/H2O2 Solution

Highly-ordered Silicon Inverted Nanocone Arrays with Broadband Light Antireflectance.

Size-controllable fabrication of nano-to-microstructures on silicon surface using high-density ion etching with pulsed bias

Multi-scale Micro-Nano Structures Prepared by Laser Cleaning Assisted Laser Ablation for Broadband Ultralow Reflectivity Silicon Surfaces in Ambient Air

Ultra-Low-Reflective, Self-Cleaning Surface by Fabrication Dual-Scale Hierarchical Optical Structures on Silicon

Formation of ultralow-reflectance silicon surface by dry etching

Fabrication of Large Area Subwavelength Antireflection Structures on Si Using Trilayer Resist Nanoimprint Lithography and Liftoff

Self-Assembled Monolayer Islands Masked Chemical Etching for Broad-Band Antireflective Silicon Surfaces

Scalable Nanostructuring on Polymer by a SiC Stamp: Optical and Wetting Effects

Large-scale Patterning of Hydrophobic Silicon Nanostructure Arrays Fabricated by Dual Lithography and Deep Reactive Ion Etching