Abstract:We present a fiber-optic sensor based on a fiber Bragg grating (FBG) whose core has an offset to that of the lead-in fiber from splicing for simultaneous refractive index (RI) and temperature measurement. Due to the core offset, the core mode in the lead-in fiber is coupled to both the core mode and the cladding modes of the sensing fiber with the FBG. Then the two oppositely propagating code modes, the cladding modes, and the core modes are coupled by the FBG at particular wavelengths determined by the effective indices of the modes and the FBG structure, resulting in two peaks in the FBG reflection spectrum. The peak wavelength corresponding to the core-cladding mode coupling is sensitive to both RI and temperature, while the peak wavelength corresponding to the core-core mode coupling is only sensitive to temperature. Utilizing the difference of two reflection peaks of these coupling modes, both RI and temperature can be detected simultaneously. We fabricate and characterize a sensor. The preliminary experimental results show that it can detect the refractive index in a range of 1.33 to 1.4421, with a temperature sensitivity of 10 pm/degrees C. (C) The Authors. Published by SPIE under a Creative Commons Attribution 3.0 Unported License. Distribution or reproduction of this work in whole or in part requires full attribution of the original publication, including its DOI. [DOI: 10.1117/1.OE.52.2.024402]

Reflective fiber-optic refractometer based on a thin-core fiber tailored Bragg grating reflection.

Reflective Optical Fiber Sensors Based on Tilted Fiber Bragg Gratings Fabricated With Femtosecond Laser

Core-Offset-Based Fiber Bragg Grating Sensor for Refractive Index and Temperature Measurement

Refractive Index Sensor Based on Tilted Fiber Bragg Grating and Stimulated Brillouin Scattering.

Refractometer Probe Based on A Reflective Carbon Nanotube-Modified Microfiber Bragg Grating

A Refractometer Based on a Micro-Slot in a Fiber Bragg Grating Formed by Chemically Assisted Femtosecond Laser Processing.

Design and Characteristics of Refractive Index Sensor Based on Thinned and Microstructure Fiber Bragg Grating

Core-cladding mode recoupling based fiber optic refractive index sensor

Temperature Self-Compensated Refractive Index Sensor Based on Fiber Bragg Grating and the Ellipsoid Structure

Temperature-insensitive optical fiber refractometer based on multimode interference in two cascaded no-core square fibers.

Refractive Index and Temperature Sensor Based on D-Shaped Fiber Combined With a Fiber Bragg Grating

A High‐sensitivity Refractometer Based on Etched Thin‐core Fiber Modal Interferometer

Thinned Multicore Fiber Supermode Bragg Grating and Interferometer for Temperature-Compensated Refractive Index Sensing

Temperature-insensitive refractive index sensor based on tilted fiber Bragg grating

Novel NCF-FBG Interferometer for Simultaneous Measurement of Refractive Index and Temperature

Refractometer Based on a Liquid Core FBG Device

Intensity-Modulated Refractometer with Long-Period Fiber Gratings Near Turn-Around Point for Low Refractive Index Detection

Etched multicore fiber Bragg gratings for refractive index sensing with temperature in-line compensation

Temperature and Refractive Index Sensor Based on an Etched Thin Core Fiber

Temperature-insensitive refractive index sensor based on high-order-resonance short-line long-period fiber grating

Fiber Optic Spr Sensor for Refractive Index and Temperature Measurement Based on Mmf-Fbg-Mmf Structure