Abstract:We present a fiber-optic sensor based on a fiber Bragg grating (FBG) whose core has an offset to that of the lead-in fiber from splicing for simultaneous refractive index (RI) and temperature measurement. Due to the core offset, the core mode in the lead-in fiber is coupled to both the core mode and the cladding modes of the sensing fiber with the FBG. Then the two oppositely propagating code modes, the cladding modes, and the core modes are coupled by the FBG at particular wavelengths determined by the effective indices of the modes and the FBG structure, resulting in two peaks in the FBG reflection spectrum. The peak wavelength corresponding to the core-cladding mode coupling is sensitive to both RI and temperature, while the peak wavelength corresponding to the core-core mode coupling is only sensitive to temperature. Utilizing the difference of two reflection peaks of these coupling modes, both RI and temperature can be detected simultaneously. We fabricate and characterize a sensor. The preliminary experimental results show that it can detect the refractive index in a range of 1.33 to 1.4421, with a temperature sensitivity of 10 pm/degrees C. (C) The Authors. Published by SPIE under a Creative Commons Attribution 3.0 Unported License. Distribution or reproduction of this work in whole or in part requires full attribution of the original publication, including its DOI. [DOI: 10.1117/1.OE.52.2.024402]

A Refractometer Based on a Micro-Slot in a Fiber Bragg Grating Formed by Chemically Assisted Femtosecond Laser Processing.

Microchanneled Chirped Fiber Bragg Grating Formed by Femtosecond Laser-Aided Chemical Etching for Refractive Index and Temperature Measurements

Miniaturized Metal-Dielectric-Hybrid Fiber Tip Grating for Refractive Index Sensing

Compact Microfluidic Sensing by Introducing Effective Phase Shift in Fiber Bragg Grating

Power-type Liquid-Level Sensor for High Refractive Index Liquid Based on Long-Period Fiber Grating

A refractive index sensor based on micro-nano fiber with chirped fiber Bragg grating embedded for a microfluidic chip

Refractive Index Sensor Based on Tilted Fiber Bragg Grating and Stimulated Brillouin Scattering.

Refractive Index Sensors Based on a Chirped Core Long-Period Fiber Grating

Temperature-insensitive refractive index sensor based on high-order-resonance short-line long-period fiber grating

Microfluidic Refractive-Index Sensors Based On Small-Hole Microstructured Optical Fiber Bragg Gratings

Microchannelled chirped fibre Bragg grating based refractive index sensor formed by femto-second laser processing and hf-etching

Refractometer Based on Fiber Mach-Zehnder Interferometer Composed of Two Micro Bending Cores

Core-Offset-Based Fiber Bragg Grating Sensor for Refractive Index and Temperature Measurement

Ultra compact and sensitive optical fiber interferometric refractive index sensor

Femtosecond laser-inscribed fiber interface Mach–Zehnder interferometer for temperature-insensitive refractive index measurement

Miniature fiber-optic near-surface gap-coupled cladding waveguide Mach-Zehnder interferometric refractive index sensor inscribed by femtosecond laser

A High‐sensitivity Refractometer Based on Etched Thin‐core Fiber Modal Interferometer

A Microfluidic Refractometric Sensor Based on Gratings in Optical Fibre Microwires

Four-wave Mixing-Based Photonic Crystal Fiber Microfluid Sensor with Embedded U-shape Microslits

Temperature-compensated high-sensitivity refractive index, liquid level and PH sensing realization enabled by a small-period microfiber long period grating cascaded with microfiber Bragg grating

Highly sensitive fiber Bragg grating refractive index sensors