Abstract:Optical fiber devices and applications in the 2-mu m band have been investigated extensively due to its unique advantages, such as eye safety. A fiber sensor based on tilted fiber Bragg grating with a grating plane angle of 2 deg is fabricated and experimentally tested. To the best of the authors' knowledge, this is the first tilted fiber Bragg grating sensor to realize simultaneous measurements of temperature, axial strain, and a certain range of surrounding refractive index (SRI) at the 2-mu m band. This paper uses the wavelength detection method and selects three independent resonant wavelengths as the investigated parameters. Results show that perturbations of temperature, axial strain, and SRI can shift the wavelengths of the core mode resonance and cladding mode resonance to some degree. The temperature sensitivities of the core mode and cladding mode are nearly the same, but their axial-strain sensitivities are different. Furthermore, the core mode is insensitive to the change in SRI. The sensitivities of SRI, temperature, and strain can thus be obtained by experimentally determining the wavelength shifts of the three independent resonance peaks. A 3 x 3 matrix containing the relationship coefficients between the disturbances of temperature, axial strain, and SRI and wavelength shifts is constructed. By reversely solving the matrix equation, variations in temperature, strain, and SRI can be obtained using the experimental determination of wavelength drifts. (C) The Authors. Published by SPIE under a Creative Commons Attribution 3.0 Unported License.

Temperature-insensitive refractive index sensor based on tilted fiber Bragg grating

Enhanced sensitivity refractive index sensor using tilted fiber Bragg grating with thinned cladding

Refractive Index Sensor Based on Tilted Fiber Bragg Grating and Stimulated Brillouin Scattering.

Refractive-index sensor based on tilted fiber Bragg grating interacting with multimode fiber

High sensitivity refractive index sensor based on tilted fiber Bragg gratings

Temperature-insensitive refractive index sensor based on tilted moiré FBG with high resolution.

Simultaneous measurement of surrounding temperature and refractive index by the tilted fiber Bragg grating

A Refractive Index Insensitive Temperature Sensor Based on 45°-Tilted Grating Pair

Core-Offset-Based Fiber Bragg Grating Sensor for Refractive Index and Temperature Measurement

All-fiber Temperature and Refractive Index Sensor Based on a Cascaded Tilted Bragg Grating and a Bragg Grating

Refractive Index and Temperature Sensor Based on Cladding-Mode Bragg Grating Excited by Abrupt Taper Interferometer

Temperature Self-Compensated Refractive Index Sensor Based on Fiber Bragg Grating and the Ellipsoid Structure

Temperature-insensitive high-sensitivity refractive index sensor based on a thinned helical fiber grating with an intermediate period

Optic Sensors of High Refractive-Index Responsivity and Low Thermal Cross Sensitivity That Use Fiber Bragg Gratings of >80 Degrees Tilted Structures.

Refractive Index and Temperature Sensor Based on D-Shaped Fiber Combined With a Fiber Bragg Grating

Single Weakly Tilted FBG in 2-Μm Band Capable of Measuring Temperature, Axial Strain, and Surrounding Refractive Index

Fiber Optic Refractive Index Sensor Based on Pi-Phase Shifted Fiber Bragg Grating Fabricated on Etched Side-Hole Fiber

Research on sensitive characteristics of tilted fiber grating sensors

Optical Fiber Refractometer Based on Tapered Tilted-Fiber Bragg Grating

Temperature-insensitive refractive index sensor based on high-order-resonance short-line long-period fiber grating

Design and Characteristics of Refractive Index Sensor Based on Thinned and Microstructure Fiber Bragg Grating