Abstract:Optical fiber devices and applications in the 2-mu m band have been investigated extensively due to its unique advantages, such as eye safety. A fiber sensor based on tilted fiber Bragg grating with a grating plane angle of 2 deg is fabricated and experimentally tested. To the best of the authors' knowledge, this is the first tilted fiber Bragg grating sensor to realize simultaneous measurements of temperature, axial strain, and a certain range of surrounding refractive index (SRI) at the 2-mu m band. This paper uses the wavelength detection method and selects three independent resonant wavelengths as the investigated parameters. Results show that perturbations of temperature, axial strain, and SRI can shift the wavelengths of the core mode resonance and cladding mode resonance to some degree. The temperature sensitivities of the core mode and cladding mode are nearly the same, but their axial-strain sensitivities are different. Furthermore, the core mode is insensitive to the change in SRI. The sensitivities of SRI, temperature, and strain can thus be obtained by experimentally determining the wavelength shifts of the three independent resonance peaks. A 3 x 3 matrix containing the relationship coefficients between the disturbances of temperature, axial strain, and SRI and wavelength shifts is constructed. By reversely solving the matrix equation, variations in temperature, strain, and SRI can be obtained using the experimental determination of wavelength drifts. (C) The Authors. Published by SPIE under a Creative Commons Attribution 3.0 Unported License.

Simultaneous measurement of surrounding temperature and refractive index by the tilted fiber Bragg grating

Refractive Index Sensor Based on Tilted Fiber Bragg Grating and Stimulated Brillouin Scattering.

Temperature-insensitive refractive index sensor based on tilted fiber Bragg grating

Simultaneous Measurement of Refractive Index and Temperature Using a Hybrid-Grating Sensor

Simultaneous Measurement of Refractive Index and Temperature Using a Mach-Zehnder Interferometer with Forward Core-Cladding-core Recoupling

Side Polished Fiber Bragg Grating Sensor For Simultaneous Measurement Of Refractive Index And Temperature

Fiber Bragg Grating-Based Fiber Sensor for Simultaneous Measurement of Refractive Index and Temperature

High sensitivity refractive index sensor based on tilted fiber Bragg gratings

Simultaneous Measurement of Temperature and Refractive Index Based on Microfiber Bragg Grating in Sagnac Loop

Enhanced sensitivity refractive index sensor using tilted fiber Bragg grating with thinned cladding

Core-Offset-Based Fiber Bragg Grating Sensor for Refractive Index and Temperature Measurement

Differential FBG sensor for temperature-independent refractive index measurement

Cladless Few Mode Fiber Grating Sensor for Simultaneous Refractive Index and Temperature Measurement

Single Weakly Tilted FBG in 2-Μm Band Capable of Measuring Temperature, Axial Strain, and Surrounding Refractive Index

Simultaneous Measurement of Strain and Temperature Using Single Tilted Fibre Bragg Grating

Fiber modal interferometer with embedded fiber Bragg grating for simultaneous measurements of refractive index and temperature

Refractive index sensor based on measuring the transmission power of tilted fiber Bragg grating☆

Refractive Index and Temperature Sensor Based on D-Shaped Fiber Combined With a Fiber Bragg Grating

Analysis of Temperature-Insensitive Sensor Probe for SRI Measurement Via Etched Cladding FM-FBG

Carbon Nanotube-Deposited Tilted Fiber Bragg Grating for Refractive Index and Temperature Sensing

Novel NCF-FBG Interferometer for Simultaneous Measurement of Refractive Index and Temperature