Abstract:A simply fabricated, highly sensitive, and inexpensive optical fiber temperature sensor is reported with a Fabry–Perot (FP) microcavity of controlled length. The microcavity with controllable length is fabricated by single-mode fiber (SMF) and polydimethylsiloxane (PDMS) for temperature sensing. After the PDMS is cured, the SMF is connected to the supercontinuum light source (SCLS) and the optical spectrometer analyzer (OSA) for online observation of the reflection spectrum. The micro-displacement platform is used to pull the SMF to form an air cavity. After the air cavity is stabilized, ultraviolet (UV) activated glue is used for packaging outside the PDMS. The FP microcavity is formed by the end face of the SMF and the face of PDMS. The length of the FP microcavity can be controlled online by the micro-displacement platform to a minimum of 15 µm. The free spectral range (FSR) may reach 74.8 nm and the interference fringe contrast (IFC) is up to 19.8 dB to allow sensitive measurements across a wide temperature range. The experiments demonstrate a high temperature sensitivity of 5.388 nm/°C from 33 to 93 °C with high repeatability and linearity (R2=0.9937). Stability experiments showed that the maximum changes in wavelength and intensity are only 45 pm and 0.035 dB, respectively. It is anticipated that the easily constructed, compact, and inexpensive fiber-optic temperature sensor will be employed in practical applications.

Temperature-insensitive optical fiber refractometer based on multimode interference in two cascaded no-core square fibers.

Simultaneous Measurement of Refractive Index and Temperature Using a Mach-Zehnder Interferometer with Forward Core-Cladding-core Recoupling

Integrated All-Fiber Sensor for Simultaneous Measurements of Curvature and Temperature

Folded-tapered multimode-no-core fiber sensor for simultaneous measurement of refractive index and temperature

Fiber Optic Sensor for Simultaneous Measurement of Refractive Index and Temperature Based on Internal-and- External-Cavity Fabry–Pérot Interferometer Configuration

Simultaneous measurement of temperature and refractive index based on a core-offset Mach-Zehnder interferometer cascaded with a long-period fiber grating

An Optical Sensor Designed From Cascaded Anti-Resonant Reflection Waveguide and Fiber Ring-Shaped Structure for Simultaneous Measurement of Refractive Index and Temperature

Refractive index and temperature sensors based on no-core fiber cascaded with long period fiber grating

Temperature and Refractive Index Sensor Based on an Etched Thin Core Fiber

Inexpensive optical fiber Fabry–Perot microcavity with controllable length for sensitive temperature measurements

Simultaneous Measurement of Temperature and Refractive Index Using an Exposed Core Microstructured Optical Fiber

Refractometer Based on Fiber Mach-Zehnder Interferometer Composed of Two Micro Bending Cores

High Sensitivity Balloon-Like Interferometer for Refractive Index and Temperature Measurement

Refractive Index and Temperature Sensor Based on D-Shaped Fiber Combined With a Fiber Bragg Grating

Improved optical fiber Mach-Zehnder high-sensitivity refractive index sensor

Ultrasensitive RI and temperature sensor based on cascaded microfiber MZIs with Vernier effect

A novel temperature insensitive refractive index sensor based on dual photonic crystal fiber

Temperature-insensitive optical sensors based on two cascaded identical microring resonators

Temperature-insensitive refractive index sensor based on high-order-resonance short-line long-period fiber grating

Refractive Index Sensor Based on No-Core Fiber With Optoelectronic Oscillator Interrogation

Ultrasensitive Temperature Sensor Based on Refractive Index Liquid-Sealed Thin-Core Fiber Modal Interferometers