Abstract:BACKGROUND: There are several methods to restore the failure of screw fixation at present. but its efficacy is not satisfactory.OBJECTIVE: To evalnate the hiomechanical effect of hollow screws with lateral holes augmented with polymethyl methacrylate(PMMA) in strengthening the fixation to improve the stability of the screw.DESIGN: A completely randomized controlled experiment was conducted.SETTING and PARTICIPANTS: The experiment was completed in the Institute of Biomechanics and Anatomy, Tongji Medical College, Huazhong University of Science and Technology. The subjects were fresh adult cadavers(voluntarily provided by the relatives).INTERVENTIONS: A total of 32 fresh thoracolumbar vertebrae(T11-L4) of 8adult cadavers were randomdy employed in this experiment. Solid screws of 6.5mm in diameter were implanted directly into the pedicle of vertebral arch unilaterally(subgroup A), and hollow screws with lateral holes of equivalent diameter were implanted contralaterally(snbgroup B) on 10 fresh thoracolumbar vertebrae(T11-L4) . Then the screws of both subgroups were pulled out and axial pullout test (F-max) was performed (control group), and 3-5 mL PMMA was injected into the track of every screw. Five minutes later, the solid screws(subgroup C) and the hollow screws(subgoup D) were reimplanted into the initial track respectively. An hour later at room temperature,axial pullout test was employed again(restoration group). Solid screws of 6.5mm in diameter were implanted into the pedicle of vertebral arch unilaterally (subgroup E). and hollow screws with lateral holes of equivalent diameter were implanted eontralaterally(subgroup F) on other 10 fresh thoracolumbar vertebrae. A drilling hit of 3.5 mm in diameter was used to prepare track,then screwed in the pedicle screws after injecting PMMA. An hour later,axial pullout test was employed(reinforcement group), and the distribution of PMMA was observed. Periodical/Cyclic bending resistance test on hollow screws with lateral holes in pedicle of vertebral arch was performed on the rest 12 vertebrae. And three point bending test was made on 10 solid screws and 10 hollow screws with lateral holes, respectively.MAIN OUTCOME MEASURES: Axial Pull-out force, displacement,maximtun bending force.RESULTS: Axial pullout strength was (829.2 ± 220.9) N in subgroup A,(855.0±207.5) N in subgroup B. (1853.5±387.4) N in subgroup C,(1924.4 ±383.2) N in subgroup D. (1866. 1 ±431.7) N in subgroup E and (1943.3 ±535.8) N in subgroup F. No PMMA was found in the spinal canal or on the surface of pedicle of vertebral arch when PMMA was infused into the hollow screws with lateral holes, while PMMA was easily found in thc spinal canal or on the surface of the pedicle of vertebral arch in solid screws. The hollow screws with lateral holes infused with PMMA could bear more loadings or induce fewer shifts under the same loadings compared with the controls. The max loading force of the hollow solid screws with lateral holes was (2051.29 ±69.86) N, the elastic modulus was (23941.8 ±1467.4) N/mm2 and the energy absorption was (40. 1873 ± 1. 4693) J.While the max loading force of the solid screws was (2075.01 ± 117.57)N,the elastic modulus was (24991.8 ± 1962.3) N/mm2, and the energy absorption was (44. 9630 4 1. 8663) J.CONCLUSION: PMMA can increase significantly the stabilization of the screws in pedicle of vertebral arch. And no PMMA was found in the spinal canal or on the surface of pedicle of vertebral arch when PMMA was inffused into the hollow screws with lateral holes, which is suitable for the fixation of loosing screw and the repair of the wound when screws are pulled out.

Improving Fixation Strength of Pedicle Screw by Microarc Oxidation Treatment: an Experimental Study of Osteoporotic Spine in Sheep

Relationship of Vertebral Body Bone Mineral Density with Insertional Torque and Pull-out Strengths of Pedicle Screws and Its Clinical Significance

Superior cortical screw in osteoporotic lumbar vertebrae: A biomechanics and microstructure-based study.

Biomechanical comparison of 4 fixation techniques of sacral pedicle screw in osteoporotic condition.

Effect of Combined Treatment with Pulsed Electromagnetic Field Stimulation and Sclerostin Monoclonal Antibody on Changes in Bone Metabolism and Pedicle Screw Augmentation in Rabbits with Ovariectomy-Induced Osteoporosis.

Calcium phosphate composited with bone morphogenetic protein-2 for enhancement of pedicle screws in osteoporotic rabbits

Biomechanical effect of osteoporosis on sacral pedicle screws instrumentation

Development of a new screw with porous sides and its long-term efficacy for internal fixation of lumbar spondylolysis

Micro-Computed Tomography Analysis and Histological Observation of the Screw-Bone Interface of Novel Porous Scaffold Core Pedicle Screws and Hollow Lateral Hole Pedicle Screws: A Comparative Study in Bama Pigs

Biomechanical evaluation and optimal design of a pedicle screw with double bent rods internal fixation system based on PE-PLIF fusion

Comparison of anchoring strengths in osteoporotic sacrum among different pedicle screws and bone cement augmentation

CHOICE OF BONE CEMENT AUGMENTATION TECHNIQUES WHEN SACRAL PEDICLE SCREW LOOSENING

Biomechanical Evaluation of an Adaptive-Motion Pedicle Screw Fixation System: Experimental and Numerical Analysis

Effect of the degree of osteoporosis on the biomechanical anchoring strength of the sacral pedicle screws: an in vitro comparison between unaugmented bicortical screws and polymethylmethacrylate augmented unicortical screws.

Comparison Between Two Pedicle Screw Augmentation Instrumentations in Adult Degenerative Scoliosis with Osteoporosis

3D Printed Pedicle Screws with Microarc Oxidation Ceramic Interfaces Enhance Osteointegration and Orthopedic Fixation Feasibility

Design of fusion equipment of pedicle of vertebrae and biomechanical study of its effect after addition polymethylmethacrylate

A Prospective Study on the Feasibility, Safety, and Efficacy of a Modified Technique to Augment the Strength of Pedicle Screw in Osteoporotic Spine Fixation

Biomechanical Effect of the Correction on the Anchoring Strength of De-Orbiting S1 Bicortical Pedicle Screw - an In-Vitro Investigation in Normal and Osteoporotic Conditions

Biomechanical comparison of a new undercut thread design versus the V-shape thread design for pedicle screws

A Novel Porous Interbody Fusion Cage Modified by Microarc Oxidation and Hydrothermal Treatment Technology Accelerate Osseointegration and Spinal Fusion in Sheep