Abstract:BACKGROUND CONTEXT : With the aging population, osteoporosis, which leads to poor fusion, has become a common challenge for lumbar surgery. In addition, most people with osteoporosis are elderly individuals with poor surgical tolerance, and poor bone quality can also weaken the stability of internal fixation. PURPOSE : This study compared the fixation strength of the bilateral traditional trajectory screw structure (TT-TT), the bilateral cortical bone trajectory screw structure (CBT-CBT), and the hybrid CBT-TT (CBT screws at the cranial level and TT screws at the caudal level) structure under different bone mineral density conditions. STUDY DESIGN : A finite element (FE) analysis study. METHODS Above all, we established a healthy adult lumbar spine model. Second, under normal and osteoporotic conditions, three transforaminal lumbar interbody fusion (TLIF) models were established: bilateral traditional trajectory (TT-TT) screw fixation, bilateral cortical bone trajectory (CBT-CBT) screw fixation, and hybrid cortical bone trajectory screw and traditional trajectory screw (CBT-TT) fixation. Finally, a 500-N compression load with a torque of 10 N/m was applied to simulate flexion, extension, lateral bending, and axial rotation. We compared the range of motion (ROM), adjacent disc stress, cage stress, and posterior fixation stress of the different fusion models. RESULTS : Under different bone mineral density conditions, the range of motion of the fusion segment was significantly reduced. Compared to normal bone conditions, the ROM of the L4-L5 segment, the stress of the adjacent intervertebral disc, the surface stress of the cage, and the maximum stress of the posterior fixation system were all increased in osteoporosis. Under most loads, the ROM and surface stress of the cage and the maximum stress of the posterior fixation system of the TT-TT structure are the lowest under normal bone mineral density conditions. However, under osteoporotic conditions, the fixation strength of the CBT-CBT and CBT-TT structures are higher than that of the TT-TT structures under certain load conditions. At the same time, the surface stress of the intervertebral fusion cage and the maximum stress of the posterior fixation system for the two structures are lower than those of the TT-TT structure. CONCLUSION : Under normal bone mineral density conditions, transforaminal lumbar interbody fusion combined with TT-TT fixation provides the best biomechanictability. However, under osteoporotic conditions, CBT-CBT and CBT-TT structures have higher fixed strength compared to TT-TT structures. The hybrid CBT-TT structure exhibits advantages in minimal trauma and fixation strength. Therefore, this seems to be an alternative fixation method for patients with osteoporosis and degenerative spinal diseases. CLINICAL SIGNIFICANCE This study provides biomechanical support for the clinical application of hybrid CBT-TT structure for osteoporotic patients undergoing TLIF surgery.

Superior cortical screw in osteoporotic lumbar vertebrae: A biomechanics and microstructure-based study.

Relationship of Vertebral Body Bone Mineral Density with Insertional Torque and Pull-out Strengths of Pedicle Screws and Its Clinical Significance

Biomechanical study of space frame structure based on bone cement screw

Biomechanical stability of atlantoaxial and occipitocervical fixations with unilateral spinous process screw plus contralateral pedicle screw: a finite element analysis

Biomechanical Assessment of Screw Safety Between Far Cortical Locking and Locked Plating Constructs.

Biomechanical comparative study of midline cortical vs. traditional pedicle screw trajectory in osteoporotic bone

A Bicortical Pedicle Screw in the Cephalad Trajectory Is the Best Option for the Fixation of an Osteoporotic Vertebra: A Finite Element Study

Biomechanical comparison of 4 fixation techniques of sacral pedicle screw in osteoporotic condition.

Biomechanical Analysis of the Posterior Pedicle Screw and the Lateral Mass Screw on the Atlas

Development of a new screw with porous sides and its long-term efficacy for internal fixation of lumbar spondylolysis

A Prospective Study on the Feasibility, Safety, and Efficacy of a Modified Technique to Augment the Strength of Pedicle Screw in Osteoporotic Spine Fixation

Influence of Screw Length and Cement Position Within the Injured Vertebra on Fixation Strength in Short-Segment Fixation of Osteoporotic Thoracolumbar Burst Fractures

Comparative finite element analysis of posterior short segment fixation constructs with or without intermediate screws in the fractured vertebrae for the treatment of type a thoracolumbar fracture

Biomechanical analysis and optimization of screw fixation technique for the cortical bone channel of lower thorax: Study protocol clinical trial (SPIRIT Compliant)

Pedicle screw fixation strength: a biomechanical comparison between 4.5-mm and 5.5-mm diameter screws in osteoporotic upper thoracic vertebrae.

Biomechanical Evaluation of an Adaptive-Motion Pedicle Screw Fixation System: Experimental and Numerical Analysis

Biomechanical effect of osteoporosis on sacral pedicle screws instrumentation

A Novel Screw Modeling Approach to Study the Effects of Screw Parameters on Pullout Strength.

Biomechanical Assessment of Different Transforaminal Lumbar Interbody Fusion Constructs in Normal and Osteoporotic Condition-A Finite Element Analysis

Optimal design and biomechanical analysis of sandwich composite metal locking screws for far cortical locking constructs

Biomechanical comparison of pedicle screw fixation strength among three different screw trajectories using single vertebrae and one-level functional spinal unit