Abstract:A series of TiO2-SiO2 composite sols have been synthesized using titanium (IV) isopropoxide and tetraethyl orthosilicate as precursors under acidic conditions. The stability of the binary sols is improved by a prehydrolysis step of tetraethyl orthosilicate. Assisted by heat treatment, the refractive index of the TiO2-SiO2 hybrid films obtained can be tuned in a wide range. On the basis of film optical constants derived from fitting of transmittance spectrum, two types of antireflection coatings with quarter-half and quarter-half-quarter multilayer structures are designed, and ordered mesoporous SiO2 film and dense SiO2 film are proposed to be used as the top layer, respectively. According to theoretical design requirements, the two antireflection coatings are successfully constructed by selecting the TiO2-SiO2 films with appropriate refractive index as the other layers. The average transmittance of the triple-layer coating at 400–800 nm is 98.74%, and that of the double-layer coating even reaches 99%. Meanwhile, the two types of multilayer coatings show good mechanical properties, which benefit from the tough skeleton of each layer. X-ray reflectivity measurements were also performed on the multilayer structures and the obtained thickness of each layer is consistent with that in the theoretical design. The results show that precise control of film thickness and refractive index is achievable using sol-gel techniques. Owing to excellent control on sol composition, the practical sol-gel route has high potential for the production of antireflective coatings.The double-layer and triple-layer broadband antireflection coatings are successfully constructed based on the optimal combination of TiO2-SiO2 hybrid films and SiO2 films by dip coating.

Sol–gel Preparation of Double-Layer Tri-Wavelength Antireflective Coating

A novel trilayer antireflection coating using dip-coating technique

Anti-reflection Coating at 550 Nm Fabricated by Atomic Layer Deposition

Wide-angle Broadband Antireflection Coatings with Nano-Taper Hydrated Alumina Film.

A novel structure for omnidirectional antireflection coating on glass substrate

Low-Temperature Preparation of SiO2/Nb2O5/TiO2–SiO2 Broadband Antireflective Coating for the Visible via Acid-Catalyzed Sol–Gel Method

Hard Antireflective Coatings in the Visible Band

Sol-gel Preparation of a Silica Antireflective Coating with Enhanced Hydrophobicity and Optical Stability in Vacuum

High performance hierarchical nanoporous antireflective films by a facile sol–gel process

Wide-angle Broadband Antireflection with Nano-taper Hydrated Alumina Film

Sol-gel Preparation of Self-Cleaning SiO2-TiO2/SiO2-TiO2 Double-Layer Antireflective Coating for Solar Glass

Preparation of Antireflective Coatings with High Transmittance and Enhanced Abrasion-Resistance by a Base/acid Two-Step Catalyzed Sol–gel Process

Preparation of double-layer two wavelength infrared antireflective coating on CdSe substrate

Design and preparation of superhydrophobic, broadband and double-layer antireflective coatings

Sol-gel synthesis of TiO2-SiO2 hybrid films with tunable refractive index for broadband antireflective coatings covering the visible range

Design and Sol–gel Preparation of a Six-Layer Tri-Wavelength ORMOSIL Antireflective Coating for a High Power Laser System

Enhanced antireflective and laser damage resistance of refractive-index gradient SiO2 nanostructured films at 1064 nm

Design and fabrication of multilayer antireflection coating for optoelectronic devices by plasma enhanced chemical vapor deposition

Bilayer SiO2 Nanorod Arrays as Omnidirectional and Thermally Stable Antireflective Coating

One-step sol–gel preparation of PDMS–silica ORMOSILs as environment-resistant and crack-free thick antireflective coatings

Omnidirectional Sio2 Ar Coatings