Abstract:Sol–gel silica antireflective (AR) coatings possess a high specific surface area that is more susceptible to be contaminated by absorption of contaminants from the environment, which will increase the refractive index and reduce the transmittance. Ammonia and γ -methacryloxypropyltrimethoxysilane (KH570) vapor treatment was employed to passivate the silica AR coating, thereby enhancing the environmental stability. The properties of the coatings were characterized with Fourier transfer infrared absorption spectroscopy, scanning electron microscopy, atomic force microscopy, UV–Vis–NIR spectrometer, and contact angle measurement. The results showed that after the vapor treatment, the coatings became denser and the environmental stability was greatly improved. After being exposed to a humid environment (RH > 90%) and low-vacuum environment with intentionally induced organic contaminants for 60 days, the transmittance of the modified SiO 2 coating decreased by only 0.08% and 0.2%, respectively. Meanwhile, the average transmittance decreased by only 0.02% after being rubbed for 1000 cycles, indicating that the co-treated coating also possessed a good abrasion resistance.

Preparation of Antireflective Coatings with High Transmittance and Enhanced Abrasion-Resistance by a Base/acid Two-Step Catalyzed Sol–gel Process

Sol-gel Preparation of Hydrophobic Silica Antireflective Coatings with Low Refractive Index by Base/acid Two-Step Catalysis.

Sol−Gel Preparation of PDMS/Silica Hybrid Antireflective Coatings with Controlled Thickness and Durable Antireflective Performance

Design and preparation of SiO 2/TiO 2/SiO 2-TiO 2 antireflective coatings with excellent abrasion-resistance and transmittance via sol-gel process

Design and Preparation of SiO2/TiO2/SiO2-TiO2 Antireflective Coatings with Excellent Abrasion-resistance and Transmittance Via Sol-Gel Process

Sol-Gel Preparation of HTMS-Silica Hydrophobic Coatings with High Environment-Resistance

Sol–gel preparation of antireflective coatings at 351 nm with different thickness and improved moisture-resistance

A simple route to prepare crack-free thick antireflective silica coatings with improved antireflective stability

Design,Preparation and Modification of Third-Harmonic Silica Antireflective Coatings with Different Thickness

Design and Preparation of Sio2/Sio2-Tio2 Antireflective Coating with Excellent Environmental Resistance

Preparation of Octyltrimethoxysilane Modified SiO$lt;inf$gt;2$lt;/inf$gt; Hydrophobic Antireflective Coating

Hydrophobic and Optical Properties of HMDS/Silica Hybrid Antireflective Coating Prepared via Sol-gel Method

An Abrasion-Resistant and Broadband Antireflective Silica Coating by Block Copolymer Assisted Sol-Gel Method.

Sol-gel Preparation of a Silica Antireflective Coating with Enhanced Hydrophobicity and Optical Stability in Vacuum

Sol–gel preparation of SiO2/TiO2/SiO2–TiO2 broadband antireflective coating for solar cell cover glass

Preparation of Sponge-Like Porous SiO2antireflective Coatings with Excellent Environment-Resistance by an Acid-Catalysed Sol–gel Method

Durable silica antireflective coating prepared by combined treatment of ammonia and KH570 vapor

Design and Preparation of Multi-Functional Single-Layer Silica Antireflective Coatings

One-step sol–gel preparation of PDMS–silica ORMOSILs as environment-resistant and crack-free thick antireflective coatings

Sol-gel Preparation of Anti-Fogging SiO2/SiO2-TiO2 Double-layer Antireflective Coating

Double-layer Tri-Wavelength Hydrophobic Antireflective Coatings Derived from Methylated Silica Nanoparticles and Hybrid Silica Nanoparticles