Abstract:Design of photocatalyst materials for hydrogen production is of great interest due to a lack of cost-effective candidates. Titanium dioxide (TiO 2 ) is a well-known photocatalyst with good stability, reasonable photoactivity, and low cost. To improve the efficiency and selectivity, we apply a surface modification approaches using nanostructured Cerium dioxide (CeO 2 ) deposited onto TiO 2 by atomic layer deposition (ALD). The deposition of CeO 2 onto TiO 2 uses the precursor Tetrakis(2,2,6,6-tetramethyl-3,5-heptanedionato)cerium (IV) (Ce(TMHD) 4 ) and co-reactant ozone. The atomic layer deposition (ALD) of CeO 2 on TiO 2 was carried out by experiments with an atmospheric pressure fluidized bed ALD reactor. The TiO 2 substrate was pre-treated using a combination of ozone and humidified nitrogen flow pulses to investigate the effect of the increase of surface functional groups on CeO 2 deposition. The physicochemical properties of the obtained CeO 2 /TiO 2 photocatalysts were characterized using different methods and their photocatalytic activity was evaluated during photocatalytic hydrogen evolution reaction. We have also performed density functional theory (DFT) calculations to investigate the reaction mechanism of metal precursors Ce(TMHD) 4 and tris(methylcyclopentadienyl)cerium (III) (Ce(MeCp) 3 ) on hydroxylated rutile and anatase TiO 2 surfaces. The hydroxyl saturation coverage on different TiO 2 facets was first addressed. These facets include anatase a-TiO 2 (001) and a-TiO 2 (101) and rutile r-TiO 2 (100) and r-TiO 2 (110). Hydroxyl groups OH and H are initially binding to surface Ti and O atoms, respectively. On a-TiO 2 (001) hydroxyl recombination to form water results in a final coverage of 0.81ML, due to the shortest neighboring HO-H distance on all surfaces. The Gibbs energy is then calculated to elucidate the effect of pressure and temperature on the hydroxylated termination of TiO 2 surfaces. The final hydroxyl coverage is as follows: 0.81ML on a-TiO 2 (001) surface, 1ML on a-TiO 2 (101) and r-TiO 2 (100) surfaces, and 0.75ML on r-TiO 2 (110) surface. Two precursors (Ce(TMHD) 4 and Ce(MeCp) 3 ) are adsorbed on hydroxylated TiO 2 surfaces. After precursor adsorption and relaxation, the surface hydroxyl coverage changes with water formation. After Ce(THMD) 4 adsorbed on r-TiO 2 (100) surface, the hydroxyl coverage is decreased from 1ML to 0.25ML with 12 H 2 O molecules formation. After Ce(MeCp) 3 adsorbed on a-TiO 2 (101) surface, although the hydroxyl coverage is not changed, the hydroxyl orientation is modified, breaking the symmetry. For Ce(TMHD) 4 , direct ligand dissociation is applied to study the mechanism of eliminating the ligands. For Ce(MeCp) 3 , the ligand can be eliminated by hydrogen transfer. The barrier for hydrogen transfer is calculated using climbing image nudged elastic band (CI-NEB) method. The results show that for Ce(MeCp) 3 , the reaction is endothermic on a-TiO 2 (101) surface, but it is overall exothermic on the other three surfaces. The facets play an important role in the eliminating the ligand. We present DFT results on the activity of ceria-modified rutile TiO 2 towards water dissociation and CO 2 activation showing that this heterostructured catalyst can promote both reactions. This work will be important to reveal the mechanism and feasibility of atomic layer deposition of ceria on different TiO 2 surface facets.

Initial growth mechanism of atomic layer deposited titanium dioxide using cyclopentadienyl-type precursor: A density functional theory study

Reaction of tetrabutyl titanate in the adsorption layer on Si02 surface

Pre-deposition Growth of Interfacial SiO2 Layer by Low-Oxygen-partial-pressure Oxidation in the Al2O3/4H-SiC MOS Structure

Atomic Layer Deposition of Tio2 from Tetrakis-Dimethyl-Amido Titanium or Ti Isopropoxide Precursors and H2o

Modulation of the adsorption chemistry of a precursor in atomic layer deposition to enhance the growth per cycle of a TiO 2 thin film

Atomic layer deposition of TiO2 on mesoporous silica

Quantum Chemical Study of the Initial Surface Reactions in Atomic Layer Deposition of TiN on the SiO(2) Surface.

DFT Study on Atomic Layer Deposition of Cerium Dioxide on Hydroxylated Titanium Dioxide As Efficient Photocatalyst

Role of a cyclopentadienyl ligand in a heteroleptic alkoxide precursor in atomic layer deposition

The Chemisorption of Tetracene on Si(100)-2x1 Surface

Understanding the prototype catalyst TiO2 surface with the help of density functional theory calculation

Initial Surface Reactions in Atomic Layer Deposition of Hfsixoy and Hfo2: A Comparative Study by Density Functional Theory

Density Functional Theory Study on the Surface Reaction Mechanism of Atomic Layer Deposited Ta2o5 on Si(100) Surfaces

Density Functional Theory Study on Surface Reaction Mechanism of Atomic Layer Deposition of ZrO(2)on Si(100)-2 X 1

Density Functional Theory Study of Initial Stage of ZrO2 Atomic Layer Deposition on Ge/Si(100)-(2×1) Surface

The adsorption behaviors of Cl2 on TiC (100) surface: A density functional theory study

Role of the Oxidizing Co-Reactant in Pt Growth by Atomic Layer Deposition Using MeCpPtMe 3 and O 2 /O 3 /O 2 -Plasma

Atomic Layer Deposition of Carbon Doped Silicon Oxide by Precursor Design and Process Tuning

In Situ X‐Ray Photoelectron Spectroscopy Study of Atomic Layer Deposited Cerium Oxide on SiO2: Substrate Influence on the Reaction Mechanism During the Early Stages of Growth

Transition Metal Atoms Pathways on Rutile TiO2 (110) Surface: Distribution of Ti3+ States and Evidence of Enhanced Peripheral Charge Accumulation

Atomic-scale study of TiO2-GR nanohybrid formation by ALD: the effect of the gas phase precursor