Abstract:To improve the heat resistance of polyimide (PI) fibers for application in harsh environments and establish a correlation among the chemical structure, fabrication performance, and material properties, a simple and rigid diamine, p-phenylenediamine (p-PDA) was incorporated into the Kapton-type PI synthesized from pyromellitic dianhydride and 4,4-diaminodiphenylmethane (ODA). The comprehensive properties of these co-PI fibers were systematically investigated to assess the impact of p-PDA addition. Two-dimensional wide-angle X-ray diffraction (WAXD) was used to investigate the evolution of the aggregation structure of the co-PI fibers during the processing. The thermogravimetric analyzer (TGA) test shows that the incorporation of p-PDA improves the heat resistance of polyimide fibers, with the 10 wt % weight loss temperature (T 10%) ranging from 582 to 605 °C and the maximum decomposition temperature (T max) of 611–635 °C for the co-PI fibers with different p-PDA contents. Additionally, the potential degradation mechanism of the PI fibers was examined by utilizing pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) and other thermal analyses. By introducing p-PDA, the content of O element (ether bond in ODA) in the system decreases, leading to a reduction in oxygen free radicals from ODA during the decomposition process of polyimides. The decrease in active species can cause a decrease in the decomposition rate and improve the heat resistance of the polyimide fibers. The study of the thermal decomposition mechanism of polyimides provides a valuable foundation for the preparation of high-performance polymer fibers with enhanced thermal resistance and excellent overall performance.

Thermal properties of the polyimide foam prepared from aromatic dianhydride and isocyanate

Preparation and Dielectric Properties of Polyimide Foams Containing Crosslinked Structures

Synthesis of poly(propylene glycol)-grafted polyimide precursors and preparation of nanoporous polyimides

Polyimide Foams with Ultralow Dielectric Constants

Preparation and Property of Polyimide Foams

Preparation and Properties of High-Temperature-Resistant, Lightweight, Flexible Polyimide Foams with Different Diamine Structures

Characterization and Thermal Degradation of Polyimide Derived from 5-Amino-2(p-aminophenyl) Benzoxazole Monomer with Pyromellitic Dianhydride

Fabrication of multifunctional polyimide foams with co-polymerized benzimidazole moieties for excellent thermal insulation and flame retardancy applications

Preparation of High-Temperature Resistant Polyimide Fibers by Introducing the p -Phenylenediamine into Kapton-Type Polyimide

Closed-Cell Rigid Polyimide Foams for High-Temperature Applications: The Effect of Structure on Combined Properties

Fabrication of Lightweight Polyimide Foams with Exceptional Mechanical and Thermal Properties

Thermal Degradation of the Polyimide Synthesized from 4,4′‐(hexafluoroisopropylidene) Diphthalic Dianhydride and 4,4′‐Diaminodiphenylmethane

Thermal Degradation Kinetics of Polyimide Containing 2,6-Benzobisoxazole Units

Thermal Degradation Mechanism and Thermal Mechanical Properties of Two High-Performance Aromatic Polyimide Fibers

Structure and Properties of Thermoplastic Polyimide Based on 4', 4'-(Oxybis (methylene)) Bis ([1.1'- Bipheny]3-Amine) Diamine

Novel Synthesis of Polyimide Foams with Aromatic and 1,6-Diaminohexane Imide Bonding

Lightweight thermo- and heat-resistant composite materials based on polyimide foam

Preparation and properties of melt-processable polyimides based on fluorinated aromatic diamines and aromatic dianhydrides

Dielectric and Thermal Properties of Polyimide–Poly(ethylene Oxide) Nanofoamed Films

Low Dielectric and Thermal Properties of Polyimides Based on PMDA, BPADA, TPE-Q and TPE-R

Phenylethynyl-terminated Oligoimides Based on Bis(p-Aminophenoxy)dimethyl Silane: Effect of Siloxane Structure on Processability and Thermal Stability