Abstract:The thermal degradation behaviors of phenylethynyl-terminated polyimide and their carbon fiber reinforced composites (CFRC) are significant to be evaluated comprehensively as their high-temperature applications are gradually expanded. It is found that ether-containing thermoset polyimide (PI) film shows unique degradation behaviors near glass transition temperature ( T g ). Though the triethylamine (Et 3 N) chemical imidization method is applied, the PI backbone shows thermal stability at 371°C thermo-oxidation condition and the main degradation parts site at the curing structure. More aliphatic (C-C) linkages will be formed in the thermo-oxidation process and they are ascribed to the further crosslinking behaviors of polyene structure. However, the PI film shows stable mechanical properties after thermo-oxidation. Meanwhile, the formation of an amorphous carbon structure is found after thermo-oxidation treatment, which endows the composite with enhanced electrical properties. Though the micro-cracking phenomenon happens at the matrix/CF interface of composite surface and thus degrades its mechanical properties, the in-plane longitudinal and transverse conductivity of the composite perform an increase, factors of 1.13 to 2.56×10 4 S/m and 2.28 to 454.8 S/m, respectively. Mechanism study indicates that the formation of amorphous carbon components is caused by the structural rearrangement of the degrading polyene curing structure and becomes more in the thermo-oxidation process, not affecting the backbone integrity and mechanical stability of the PI matrix. As a result, thermo-oxidation treatment degrades the mechanical properties of the composite, whereas the formed amorphous carbon component acts as a self-growing carbon-based nano-filling structure at the PI/CF interface and enhances the electrical contact of the carbon fibers.

Thermal Degradation of the Polyimide Synthesized from 4,4′‐(hexafluoroisopropylidene) Diphthalic Dianhydride and 4,4′‐Diaminodiphenylmethane

Characterization and Thermal Degradation of Polyimide Derived from 5-Amino-2(p-aminophenyl) Benzoxazole Monomer with Pyromellitic Dianhydride

Thermal Degradation Mechanism and Thermal Mechanical Properties of Two High-Performance Aromatic Polyimide Fibers

Thermal Degradation Kinetics of Polyimide Containing 2,6-Benzobisoxazole Units

Thermal Degradation of Organo-Soluble Polyimides

THERMAL DEGRADATION KINETICS OF POLY(BENZOBISOXAZOLE IMIDE)

Preparation and Thermal Kinetics of Poly(imide‐siloxanes)

Effect of high-temperature thermo-oxidation on the mechanical and electrical properties of phenylethynyl-terminated polyimide/carbon fiber composite

Synthesis and Characterization of Pyridine-Bridged Fluorinated Polyimides

In Situ Fourier Transform Infrared Spectroscopic Study of the Thermal Degradation of Isotactic Poly(Propylene)

Thermal Stability of a Novel Polytriazoleimide

Long-term thermal stability of addition-type polyimide resins derived from pyromellitic dianhydride, 2-phenyl-4,4′-diaminodiphenyl ether, and 4-phenylethynylphtalic anhydride

Clarifying the effect of moisture absorption and high-temperature thermal aging on structure and properties of polyimide film at molecular dynamic level

Organosoluble semi-alicyclic polyimides derived from 3,4-dicarboxy-1,2,3,4- tetrahydro-6-tert-butyl-1-naphthalene succinic dianhydride and aromatic diamines: Synthesis, characterization and thermal degradation investigation

Infrared-Analysis Of The Irradiation Effects In Aromatic Polyimide Films

Preparation of High-Temperature Resistant Polyimide Fibers by Introducing the p -Phenylenediamine into Kapton-Type Polyimide

Dielectric Property and Charge Evolution Behavior in Thermally Aged Polyimide Films

Thermogravimetry of Thermoplastic Polyimide Powders under Four Different Atmospheres

Thermal properties and degradation of polytetrafluoroethylene low‐molecular fractions

Tribological Behaviors of Fluorinated Polyimides at Different Temperatures

Moisture absorption and hydrothermal aging of phenylethynyl-terminated pyromellitic dianhydride-type asymmetric polyimide and composites