Abstract:Large-size diffraction gratings are essential for pulse compressors in chirped-pulse-amplified high-power laser systems, spectroscopic telescopes, etc. Fabricating large gratings requires large-aperture laser beams with collimated and aberration-free wavefronts. As an alternative a method of making monolithic gratings by optical mosaic has been proposed, which makes multiple-exposures in different areas of a substrate to enlarge the grating size. Between exposures the position and attitude of substrate must be adjusted to minimize the overall wavefront errors, with very tight accuracy requirements (similar to dozens of nanometers and tenths of micro-radians, respectively).We fully utilize the latent fringes (exposed but undeveloped fringes in photoresist) as the core reference object and the exposure beams as the adjustment beams to adjust and lock the position and attitude between consecutive exposures. This approach greatly simplifies the alignment system and eliminates many system errors. However, the diffraction efficiency of a latent grating is extremely weak (similar to 10(-5)) and excessive exposure of the latent fringes during the position and attitude adjustment should be avoided. We overcome these difficulties by carefully blocking stray lights and using a high-sensitivity CCD to monitor the interference fringes of the -1st- and 0th-order latent-fringe diffracted wavefronts. Experimentally we have made 2 x 2 mosaics of (60+28) x (53+30) mm(2) grating area. Typical peak-valley and root-mean-square values of the measured -1st-order diffraction wavefront errors are 0.06 lambda and 0.01 lambda, respectively.The mosaic conditions, detailed alignment steps, and experimental results showing position and attitude controllability will be presented. Important issues of extending the present work to large-size (possibly sub-meter) fabrication will also be discussed.

Fabrication Of Large-Size Photonic Crystals By Holographic Lithography Using A Lens Array

Flat Optical Lens by Use of 90-Degree Volume Holographic Grating Recording Geometry and Nonvolatile Thermal Fixing in LiNbO3:Fe Crystal

Simulated calculation and design for fabricating three-dimensional photonic crystal structures using holographic lithography

Nanoscale multi-beam lithography of photonic crystals with ultrafast laser

Simulated Calculation and Analysis of the Forbidden Band for Fabricating Two- and Three-Dimensional Photonic Crystal Structures Using Holographic Lithography

Layered Superlensing in Two-Dimensional Photonic Crystals

Optical fabrication of (2 + 1)-dimensional photorefractive photonic lattices by improved Billet split lens

Controllable Two-Dimensional Photonic Crystal Patterns Fabricated by Nanosphere Lithography

Fabrication and Application of Two-dimension Photonic Crystals

A three-dimensional optical photonic crystal with designed point defects

Fabrication of Large Grating by Monitoring the Latent Fringe Pattern

Photonic crystal fabrication in lithium niobate via pattern transfer through wet and dry etched chromium mask

High efficiency and scalable fabrication of fresnel zone plates using holographic femtosecond pulses

Large‐Area Fabrication of Highly Tunable Hybrid Plasmonic–Photonic Structures Based on Colloidal Lithography and a Photoreconfigurable Polymer

Photonic Crystal Structures Fabricated By Nanosphere Lithography

Fabrication of 3D Templates Using a Large Depth of Focus Femtosecond Laser

Fabrication of Optical Mosaic Gratings by Consecutive Holographic Exposures Employing A Latent-Fringe Based Alignment Technique

Large-Scale Fabrication of Photonic Nanojet Array via Template-Assisted Self-Assembly

The polarization modulation and fabrication method of two dimensional silica photonic crystals based on UV nanoimprint lithography and hot imprint

Double-layer Fabrication Scheme for Large-Area Polymeric Photonic Crystal Membrane on Silicon Surface by Multibeam Interference Lithography